List of TISI's Standards
- TIS 1-2513 (1970)
Dry cells for flashlights
Withdrawn, 24 August B.E. 2518 (1975) and replaced by TIS 96-2517 (1974)
- TIS 2-2525 (1982)
Aerated water glass bottles
- TIS 3-2526 (1983)
Local fish sauce
- TIS 4 Part 1-2529 (1986)
Incandescent lamps
- TIS 4 Part 2-2522 (1979)
Method of measurement of lamp cap temperature rise
- TIS 5-2527 (1984)
Jute bag
- TIS 6-2524 (1981)
Automotive lead-acid storage batteries
- TIS 7-2531 (1988)
Containers for lead-acid batteries
- TIS 8-2539 (1996)
Seasoning sauce
- TIS 9-2525 (1982)
Shuttlecocks
- TIS 10-2529 (1986)
Low-voltage distribution link fuses
- TIS 11-2531 (1988)
PVC insulated copper cables
- TIS 12-2530 (1987)
Asbestos cement flat sheets
- TIS 13-2530 (1987)
Sulphuric acid for use in lead-acid batteries
- TIS 14-2525 (1982)
Monosodium L-glutamate
- TIS 15 Part 1-2532 (1989)
Portland cement Part 1 Specification
- TIS 15 Part 2-2521 (1978)
Portland cement Part 2 Method of test for specific gravity of hydraulic cement
- TIS 15 Part 3-2519 (1976)
Portland cement Part 3 Method of test for fineness of hydraulic cement by the 150 mm and 75 mm sieves
- TIS 15 Part 4-2519 (1976)
Portland cement Part 4 Method of test for fineness of hydraulic cement by the 45 mm sieve
- TIS 15 Part 5-2519 (1976)
Portland cement Part 5 Method of test for fineness of Portland cement by the turbidimeter
- TIS 15 Part 6-2521 (1978)
Portland cement Part 6 Method of test for fineness of Portland cement by air permeability apparatus
- TIS 15 Part 7-2521 (1978)
Portland cement Part 7 Method of test for heat of hydration of hydraulic cement
- TIS 15 Part 8-2514 (1971)
Portland cement Part 8 Method of determination of water content in hydraulic cement
- TIS 15 Part 9-2518 (1975)
Portland cement Part 9 Method of test for time of setting of hydraulic cement by Vicat needles
- TIS 15 Part 10-2518 (1975)
Portland cement Part 10 Method of test for time of setting of hydraulic cement by Gillmore needles
- TIS 15 Part 11-2521 (1978)
Portland cement Part 11 Method of test for autoclave expansion of Portland cement
- TIS 15 Part 12-2532 (1989)
Portland cement Part 12 Test method for compressive strength of hydraulic cement mortars
- TIS 15 Part 13-2521 (1978)
Portland cement Part 13 Method of test for air content of hydraulic cement mortar
- TIS 15 Part 14-2520 (1977)
Portland cement Part 14 Method of test for potential expansion of Portland cement mortars exposed to sulphate
- TIS 15 Part 15-2519 (1976)
Portland cement Part 15 Method of testing for false set of Portland cement by paste method
- TIS 15 Part 16-2535 (1992)
Portland cement Part 16 Standard methods of sampling and acceptance of hydraulic cement
- TIS 15 Part 17-2516 (1973)
Portland cement Part 17 Method of mechanical mixing of hydraulic cement mortars
- TIS 15 Part 18-2519 (1976)
Portland cement Part 18 Chemical analysis of hydraulic cement
- TIS 15 Part 20-2521 (1978)
Portland cement Part 20 Method of test for processing additions for use in the manufacture of hydraulic cements
- TIS 15 Part 21-2533 (1990)
Portland cement Part 21 Determination of free calcium sulphate in hydrated Portland cement mortars
- TIS 16-2536 (1993)
Tinplate
- TIS 17-2532 (1989)
Unplasticized polyvinyl chloride pipes for drinking water services
- TIS 18-2529 (1986)
Asbestos-cement corrugated sheets
- TIS 19-2536 (1993)
Water for storage batteries
- TIS 20-2527 (1984)
Steel bars for reinforced concrete : round bars
- TIS 21-2515 (1972)
Silverware
- TIS 22-2539 (1996)
Terry Towels
- TIS 23-2521 (1978)
Ballast for fluorescent lamps
- TIS 24-2536 (1993)
Steel bars for reinforced concrete: deformed bars
- TIS 25-2516 (1973)
Lampholders: bayonet types
- TIS 26-2516 (1973)
Black and galvanized steel pipe with threaded end
Withdrawn, 16 November B.E. 2521 (1978) and replaced by TIS 276-2532 (1989), TIS 277-2532 (1989), TIS 281-2532 (1989)
- TIS 27-2540 (1997)
Liquefied petroleum gas containers
- TIS 28-2531 (1988)
Laundry soap
- TIS 29-2531 (1988)
Toilet soap
- TIS 30-2527 (1984)
Nitrous oxide for medical use
- TIS 31-2516 (1973)
General principles of labelling industrial products
- TIS 32-2528 (1985)
Ceramic ware in contact with food: permissible limits and method of test for lead and cadmium
- TIS 33-2531 (1988)
Trimmed sizes of printing and writing paper
- TIS 34-2536 (1993)
General principle of food hygiene
- TIS 35-2516 (1973)
Cotton yarn
- TIS 36-2516 (1973)
Wall tile
Withdrawn, 27 June B.E. 2529 (1986) and replaced by TIS 613-2529 (1986)
- TIS 37-2529 (1986)
Floor tiles
- TIS 38-2531 (1988)
Mosaic tile
- TIS 39-2516 (1973)
Alcoholic beverages
- TIS 40-2527 (1984)
Cotton canvas
- TIS 41-2529 (1986)
Sulphuric acid and oleum for industrial use
- TIS 42-2525 (1982)
Toothbrush
- TIS 43-2536 (1993)
Canned baby corn
- TIS 44-2516 (1973)
Rice bran oil
- TIS 45-2540 (1997)
Dentifrice
- TIS 46-2516 (1973)
Poplins
- TIS 47-2533 (1990)
Edible oils and fats
- TIS 48-2516 (1973)
Sweetened condensed milk
- TIS 49-2528 (1985)
Covered electrodes for arc welding of mild steel
- TIS 50-2538 (1995)
Hot-dip zinc-coated steel sheet
- TIS 51-2530 (1987)
Canned pineapple
- TIS 52-2516 (1973)
Tapioca products
- TIS 53-2536 (1993)
Matches
- TIS 54-2516 (1973)
Ordinary sheet glass
- TIS 55-2516 (1973)
Flat and square steel bars
- TIS 56-2533 (1990)
Sugar
- TIS 57-2533 (1990)
Hollow load-bearing concrete masonry units
- TIS 58-2533 (1990)
Hollow non-load-bearing concrete masonry units
- TIS 59-2516 (1973)
Concrete building brick
- TIS 60-2516 (1973)
Solid load-bearing concrete masonry units
- TIS 61-2517 (1974)
Hygienic practice for canned fruit and vegetable products
- TIS 62-2540 (1997)
Code of hygienic practice for dried fruits
- TIS 63-2523 (1980)
Filing cabinets
- TIS 64-2517 (1974)
Hard drawn copper conductor for overhead lines
- TIS 65-2517 (1974)
Cotton sheeting
- TIS 66-2525 (1982)
Drills and twills
- TIS 67-2539 (1996)
Canned lychee
- TIS 68-2531 (1988)
Canned longans
- TIS 69-2532 (1989)
Mustard greens (leaf mustard) pickles
- TIS 70-2517 (1974)
Canned mixed vegetables pickles
- TIS 71-2532 (1989)
Galvanized wire
- TIS 72-2527 (1984)
Canned peas
- TIS 73-2517 (1974)
Canned straw mushroom
- TIS 74-2529 (1986)
Paper filler clay
- TIS 75-2527 (1984)
Fertilizers
- TIS 76-2517 (1974)
Galvanized barbed wires
- TIS 77-2531 (1988)
Building bricks
- TIS 78-2528 (1985)
Laundry detergent powder
- TIS 79-2529 (1986)
Asbestos - cement asymmetrical section corrugated sheets
- TIS 80-2517 (1974)
Mixed cements
- TIS 81-2529 (1986)
Asbestos cement pressure pipes
- TIS 82-2527 (1984)
Polyvinyl formal enamelled round copper wires
- TIS 83-2527 (1984)
Vinegar
- TIS 84-2528 (1985)
White and coloured chalks
- TIS 85-2522 (1979)
Aluminium stranded conductors
- TIS 86-2522 (1979)
Aluminium conductors, steel reinforced
- TIS 87-2521 (1978)
Identification colours and marking for medical gas cylinders
- TIS 88-2517 (1974)
Identification colours and marking for industrial gas cylinders
- TIS 89-2530 (1987)
Canned sardines
- TIS 90-2530 (1987)
Metal cans for foods and drinks
- TIS 91-2539 (1996)
Edible common salt
- TIS 92-2536 (1993)
A.C. electric fans : table type and wall type
- TIS 93-2532 (1989)
Leaf springs for automobiles and trailers
- TIS 94-2517 (1974)
Unplasticized polyvinyl chloride fittings for use with pressure drain pipes and waste pipes
Withdrawn, 26 January B.E. 2536 (1993)
- TIS 95-2540 (1997)
Steel wires for prestressed concrete
- TIS 96-2528 (1985)
Dry cells and batteries (Leclanche' type)
- TIS 97-2536 (1993)
Brake linings for automobiles and motorcycles
- TIS 98-2517 (1974)
Canned sweet corn: cream style
- TIS 99-2517 (1974)
Orange juice
- TIS 100-2517 (1974)
Tomato juice
- TIS 101-2517 (1974)
Grape juice
- TIS 102-2528 (1985)
Structural clay load-bearing tile
- TIS 103-2528 (1985)
Structural clay non-load-bearing tile
- TIS 104-2517 (1974)
Carbon dioxide
Withdrawn, 30 November B.E. 2527 (1984)
- TIS 105-2539 (1996)
Solid carbon dioxide (dry ice)
- TIS 106-2517 (1974)
Asbestos cement pipes for sewerage and drainage
Withdrawn, 31 July B.E. 2529 (1986) and replaced by TIS 621-2529 (1976), TIS 622-2529 (1976)
- TIS 107-2533 (1990)
Hollow structural steel sections
- TIS 108-2517 (1974)
Sampling method and criteria for conformity for textile fabrics in piece form
- TIS 109-2517 (1974)
Sampling and testing concrete masonry units
- TIS 110-2517 (1974)
Method of test for drying shrinkage of concrete block
- TIS 111-2538 (1995)
Circular knitting fabrics
- TIS 112-2518 (1975)
Pineapple juice
- TIS 113-2526 (1983)
Round mild steel wire nails
- TIS 114-2526 (1983)
Steel nails for special purposes
- TIS 115-2529 (1986)
Quick frozen shrimps or prawns
- TIS 116-2529 (1986)
Structural steel sections
Withdrawn, 22 November B.E. 2537(1994)
- TIS 117-2517 (1974)
High voltage cables for automobiles
- TIS 118-2522 (1979)
Low voltage cables for automobiles
- TIS 119-2517 (1974)
High voltage resistance cables for automobiles
- TIS 120-2540 (1997)
Blankets
- TIS 121 Part 1-2518 (1975)
Method of testing for colour fastness to light (daylight)
- TIS 121 Part 2-2518 (1975)
Method of testing for colour fastness to artificial light (Xenon arc lamp)
- TIS 121 Part 3-2518 (1975)
Method of testing for colour fastness to washing
- TIS 121 Part 4-2518 (1975)
Method of testing for colour fastness to perspiration
- TIS 121 Part 5-2518 (1975)
Method of testing for colour fastness to rubbing
- TIS 121 Part 6-2518 (1975)
Yarn numbers
- TIS 121 Part 7-2518 (1975)
Twist in yarn
- TIS 121 Part 8-2518 (1975)
Method of testing for breaking load and extension of yarns and threads
- TIS 121 Part 9-2518 (1975)
Method of testing for breaking load and extension of woven textile fabrics
- TIS 121 Part 10-2518 (1975)
Method of testing for width of woven or knitted fabrics
- TIS 121 Part 11-2518 (1975)
Method of testing for length of woven or knitted fabrics
- TIS 121 Part 12-2518 (1975)
Method of testing for mass per unit length and area of woven textile fabrics
- TIS 121 Part 13-2518 (1975)
Method of testing for the number of threads per unit length in a sample of woven fabrics
- TIS 121 Part 14-2518 (1975)
Use of grey scale
- TIS 121 Part 15-2524 (1981)
Identification of fibres
- TIS 121 Part 16-2526 (1983)
Breaking load and elongation of textile fabrics by grab and modified grab methods
- TIS 121 Part 17-2524 (1981)
Tearing strength of woven fabrics by constant-rate-of-extension tensile testing machine
- TIS 121 Part 18-2524 (1981)
Tear resistance of woven fabrics by falling pendulum (Elmendorf) apparatus
- TIS 121 Part 19-2524 (1981)
Bursting strength and bursting distension diaphragm method
- TIS 121 Part 20-2525 (1982)
Dimensional changes of fabrics by cold water immersion
- TIS 121 Part 21-2525 (1982)
Dimensional changes of fabrics in domestic washing and drying
- TIS 121 Part 22-2526 (1983)
Resistance to surface wetting (spray test)
- TIS 121 Part 23-2526 (1983)
Resistance to water penetration-hydrostatic pressure test
- TIS 121 Part 24-2525 (1982)
Thickness of fabrics
- TIS 121 Part 25-2526 (1983)
Colour fastness to water
- TIS 122-2518 (1975)
Lead content in plastic toys
- TIS 123-2524 (1981)
Vacuum vessels
- TIS 124-2518 (1975)
Flat rubber belt for power transmission
- TIS 125-2529 (1986)
Asbestos cement joints for asbestos cement drainaged pipes
- TIS 126-2529 (1986)
Asbestos cement pressure couplings
- TIS 127-2536 (1993)
A.C. electric fans: pedestal types
- TIS 128-2528 (1985)
Precast reinforced concrete drainage pipe
- TIS 129-2530 (1987)
Rivets for general engineering purposes
- TIS 130-2518 (1975)
Sizes of folders, files and suspended filing pockets
- TIS 131-2523 (1980)
Rubber slippers
- TIS 132-2528 (1985)
Canvas shoes
- TIS 133-2518 (1975)
White Portland cement
- TIS 134-2531 (1988)
Mosaic parquet panels: teak
- TIS 135-2526 (1983)
Cotton sewing thread
- TIS 136-2539 (1996)
Canned rambutan
- TIS 137-2518 (1975)
Tufted carpets
- TIS 138-2535 (1992)
Steel binding wires
- TIS 139-2530 (1987)
Insole leather
- TIS 140-2530 (1987)
Chrome retan upper leather
- TIS 141-2518 (1975)
Canned asparagus
- TIS 142-2530 (1987)
Canned tuna
- TIS 143-2518 (1975)
Margarine
- TIS 144-2518 (1975)
Cotton fabrics for rubber belt
- TIS 145-2533 (1990)
School exercise books
- TIS 146-2536 (1993)
Classical V-belts for power transmission
- TIS 147-2530 (1987)
Conveyer belts
- TIS 148-2518 (1975)
Medical and industrial oxygen
Withdrawn, 30 November B.E. 2527 (1984) and replaced by TIS 540-2527 (1984), TIS 541-2527 (1984)
- TIS 149-2518 (1975)
Shellac varnish
- TIS 150-2534 (1991)
Sodium hydroxide for industrial use
- TIS 151-2539 (1996)
Use and maintenance of liquefied petroleum gas containers
- TIS 152-2539 (1996)
Cosmetics: General specification
- TIS 153-2540 (1997)
Structural clay non-load-bearing screen tiles
- TIS 154-2518 (1975)
Structural hollow clay floor tiles
- TIS 155-2532 (1989)
Flavoured syrup
- TIS 156-2518 (1975)
Pewter
- TIS 157-2518 (1975)
Vitreous china and earthenware sanitary appliances
Withdrawn, 28 October B.E. 2531 (1988) and replaced by TIS 791-2531 (1988), TIS 797-2531 (1988)
- TIS 158-2518 (1975)
Clay plain roofing tiles
- TIS 159-2518 (1975)
General purpose ISO metric screw threads and selected sizes for screws, bolts and nuts
- TIS 160-2528 (1985)
Methods of sampling and testing for leather
- TIS 161-2518 (1975)
Sampling method and criteria for conformity for yarns and cordages
- TIS 162-2526 (1983)
Cosmetics: shampoos
- TIS 163-2535 (1992)
Annealed low carbon steel wires
- TIS 164-2518 (1975)
Particle boards: medium density
Withdrawn, 5 September B.E. 2532 (1989) and replaced by TIS 877-2532 (1989), TIS 878-2532 (1989)
- TIS 165-2528 (1985)
Aluminium sulphate, potash alum and ammonium alum
- TIS 166-2535 (1992)
Plugs and socket-outlets for household and similar purposes
- TIS 167-2528 (1985)
Calcium silicate face bricks or sand-lime bricks
- TIS 168-2531 (1988)
Facing bricks
- TIS 169-2519 (1976)
Structural clay facing tiles
- TIS 170-2529 (1986)
Kraft paper
- TIS 171-2530 (1987)
Mechanical properties of bolts, screws and studs
- TIS 172-2530 (1987)
Asphalt adhesive for PVC asbestos floor tiles
- TIS 173-2529 (1986)
Latex foam rubbers
- TIS 174-2525 (1982)
Polyurethane enamelled round copper wires
- TIS 175-2529 (1986)
Nitrogen for industrial use
- TIS 176-2533 (1990)
Edible soya bean oil
- TIS 177-2519 (1976)
Edible cottonseed oil
- TIS 178-2538 (1995)
Plywood
- TIS 179-2540 (1997)
Silk fabric
- TIS 180-2532 (1989)
Fibreboards: hard fibreboards (hardboards)
- TIS 181-2530 (1987)
Polyvinyl acetate emulsion adhesives
- TIS 182-2529 (1986)
Absorbent cotton wool for medical purposes
- TIS 183-2528 (1985)
Starters for fluorescent lamps
- TIS 184-2527 (1984)
Lining leather
- TIS 185-2527 (1984)
Sole leather
- TIS 186-2529 (1986)
Full-chrome upper leather
- TIS 187-2519 (1976)
Fruit squashes
- TIS 188-2527 (1984)
Gypsum plaster for building purposes
- TIS 189-2519 (1976)
Glazed vitrified clay sewer pipes
- TIS 190-2519 (1976)
Filled milk
- TIS 191-2531 (1988)
Capacitors for use in tubular fluorescent and other discharge lamp circuits
- TIS 192-2538 (1995)
Wood-based panel doors
- TIS 193-2519 (1976)
Solid wood parquet strips with rectangular face
- TIS 194-2535 (1992)
Ordinary low carbon steel wires
- TIS 195-2536 (1993)
Test methods for automobile safety glasses
- TIS 196-2536 (1993)
Automotive safety glasses: laminated glass
- TIS 197-2536 (1993)
Automotive safety glasses: tempered glass
- TIS 198-2536 (1993)
Automotive safety glasses: zone tempered glass
- TIS 199-2534 (1991)
Slide fasteners
- TIS 200-2536 (1993)
Paper-clips
- TIS 201-2520 (1977)
Clearance holes for cylindrical parts
- TIS 202 Part 1-2520 (1977)
Lime : Definitions of terms relating to lime and limestone
- TIS 202 Part 2-2520 (1977)
Lime : Methods of sampling for lime and limestone products
- TIS 203-2520 (1977)
Coconut oil
- TIS 204-2527 (1984)
Cattle hides
- TIS 205-2530 (1987)
A.C. electric ceiling type fans
- TIS 206-2520 (1977)
Rivets for boiler and marine
- TIS 207-2530 (1987)
Liquid chlorine
- TIS 208-2521 (1978)
Galvanized wire netting
- TIS 209-2532 (1989)
Electric stoves: open type heating elements
- TIS 210-2520 (1977)
Drawing practice: mechanics
- TIS 210 Part 2-2525 (1982)
Mechanical drawings Part 2 Representation of gears
- TIS 210 Part 3-2525 (1982)
Mechanical drawings Part 3 Representation of springs
- TIS 210 Part 4-2525 (1982)
Mechanical drawings Part 4 Symbolic representation of welds
- TIS 210 Part 5-2526 (1983)
Mechanical drawings Part 5 Method of indicating surface texture on drawings
- TIS 210 Part 6-2529 (1986)
Mechanical drawings Part 6 Geometrical tolerancing : symbols and indications on drawings
- TIS 210 Part 7-2529 (1986)
Mechanical drawings Part 7 Geometrical tolerancing : proportions and dimensions of symbols
- TIS 210 Part 8-2529 (1986)
Mechanical drawings Part 8 Geometrical tolerancing : datums and datum-systems
- TIS 210 Part 9-2529 (1986)
Mechanical drawings Part 9 Geometrical tolerancing : maximum material principle
- TIS 211-2527 (1984)
Steel bars for reinforced concrete: rerolled round bars
- TIS 212-2520 (1977)
Clutch facings for automobiles
- TIS 213-2520 (1977)
Ready-mixed concrete
- TIS 214-2530 (1987)
Toilet tissue
- TIS 215-2530 (1987)
Facial tissue
- TIS 216-2524 (1981)
Rigid PVC conduit for electrical wiring and telephone cable
- TIS 217-2536 (1993)
Hydrochloric acid for industrial use
- TIS 218-2520 (1977)
Anodized aluminium
- TIS 219-2524 (1981)
Gypsum plasterboards
- TIS 220-2536 (1993)
Scouring powder compounds
- TIS 221-2520 (1977)
Zinc oxide for paints
- TIS 222-2539 (1996)
Hair-waving preparations
- TIS 223-2520 (1977)
Agricultural liming materials
- TIS 224-2533 (1990)
Precast non-reinforced concrete drainage pipes
- TIS 225-2533 (1990)
Hypochlorite
- TIS 226-2525 (1982)
Polyester enamelled round copper wires
- TIS 227-2525 (1982)
Spool-type porcelain insulators
- TIS 228-2520 (1977)
Tape pressure-sensitive adhesive: cellophane
- TIS 229-2540 (1997)
Dissolved acetylene
- TIS 230-2527 (1984)
Rules for the use of units of the SI units
- TIS 231-2528 (1985)
Spark plugs
- TIS 232-2527 (1984)
Upholstery leather
- TIS 233-2520 (1977)
Lac products
- TIS 234-2520 (1977)
Cosmetics: lipsticks
- TIS 235 Part 1-2527 (1984)
Physical quantities and their units Part 1 Quantities and units of space and time
- TIS 235 Part 2-2527 (1984)
Physical quantities and their units Part 2 Quantities and units of periodic and related phenomena
- TIS 235 Part 3-2527 (1984)
Physical quantities and their units Part 3 Quantities and units of mechanics
- TIS 235 Part 4-2524 (1981)
Physical quantities and their units Part 4 Quantities and units of heat
- TIS 235 Part 5-2525 (1982)
Physical quantities and their units Part 5 Quantities and units of electricity and magnetism
- TIS 235 Part 6-2524 (1981)
Physical quantities and their units Part 6 Quantities and units of light and related electromagnetic radiations
- TIS 235 Part 7-2524 (1981)
Physical quantities and their units Part 7 Quantities and units of acoustics
- TIS 235 Part 8-2524 (1981)
Physical quantities and their units Part 8 Quantities and units of physical chemistry and molecular physics
- TIS 235 Part 9-2527 (1984)
Physical quantities and their units Part 9 Quantities and units of atomic and nuclear physics
- TIS 235 Part 10-2528 (1985)
Physical quantities and their units Part 10 Quantities and units of nuclear reactions and ionizing radiations
- TIS 235 Part 11-2527 (1984)
Mathematical signs and symbols for use in the physical sciences and technology
- TIS 235 Part 12-2527 (1984)
Physical quantities and their units Part 12 Dimensionless parameters
- TIS 235 Part 13-2527 (1984)
Physical quantities and their units Part 13 Quantities and units of solid state physics
- TIS 235 Part 14-2531 (1988)
Basic and general terms in metrology
- TIS 236-2533 (1990)
Fluorescent lamps
- TIS 237-2520 (1977)
Rubber ring for pressured water pipe
- TIS 238-2520 (1977)
Galvanized mild steel water tanks
- TIS 239-2530 (1987)
Paper towels
- TIS 240-2530 (1987)
Table napkins
- TIS 241-2520 (1977)
Building lime
- TIS 242-2533 (1990)
Chili sauce
- TIS 243-2520 (1977)
Method of sampling and testing brick and structural clay tile
- TIS 244 Part 1-2520 (1977)
Methods of test for iron and steel Part 1 Vickers hardness test for steel
- TIS 244 Part 2-2520 (1977)
Methods of test for iron and steel Part 2 Brinell hardness test for steel and cast iron
- TIS 244 Part 3-2520 (1977)
Methods of test for iron and steel Part 3 Rockwell hardness test for steel (B and C scales)
- TIS 244 Part 4-2525 (1982)
Methods of test for iron and steel Part 4 Tensile testing of steel (general)
- TIS 244 Part 5-2525 (1982)
Methods of test for iron and steel Part 5 Tensile testing of steel sheet and strip
- TIS 244 Part 6-2525 (1982)
Methods of test for iron and steel Part 6 Tensile testing of steel tube
- TIS 244 Part 7-2525 (1982)
Methods of test for iron and steel Part 7 Tensile testing of steel wire
- TIS 244 Part 8-2522 (1979)
Methods of test for iron and steel Part 8 Charpy impact test (U-Notch) for steel
- TIS 244 Part 9-2522 (1979)
Methods of test for iron and steel Part 9 Izod impact test for steel
- TIS 244 Part 10-2524 (1981)
Methods of test for iron and steel Part 10 Rockwell hardness test (scale A)
- TIS 244 Part 11-2525 (1982)
Methods of test for iron and steel Part 11 Bend test for steel (general)
- TIS 244 Part 12-2525 (1982)
Methods of test for iron and steel Part 12 Bend test for steel sheet and strip
- TIS 244 Part 13-2525 (1982)
Methods of test for iron and steel Part 13 Bend test on steel tube
- TIS 244 Part 14-2525 (1982)
Methods of test for iron and steel Part 14 Reverse bend test for steel sheet and strip
- TIS 244 Part 15-2525 (1982)
Methods of test for iron and steel Part 15 Reverse bend test for steel wire
- TIS 244 Part 16-2525 (1982)
Methods of test for iron and steel Part 16 Torsion testing of steel wire
- TIS 245-2520 (1977)
Flashlights
- TIS 246-2539 (1996)
Canned tomatoes
- TIS 247-2520 (1977)
Polyester sewing thread
- TIS 248-2531 (1988)
Corrugated sheet steel beams for highway guardrail
- TIS 249-2540 (1997)
Malleable cast iron threaded pipe fittings
- TIS 250-2520 (1977)
Vitreous china and earthenware water-closet
Withdrawn, 28 October B.E. 2531 (1988) and replaced by TIS 791-2531 (1988), TIS 797-2531 (1988)
- TIS 251-2531 (1988)
Absorbent gauze, gauze bandages and gauze pads
- TIS 252-2521 (1978)
Soy sauce
- TIS 253-2521 (1978)
Fishing net: nylon and polyethylene
- TIS 254-2529 (1986)
Bicycle frames
- TIS 255-2521 (1978)
Safety relief device for gas cylinder
- TIS 256-2540 (1997)
Cast iron metal-seated gate valves for water services
- TIS 257 Part 1-2521 (1978)
Drinking water Part 1 Specification
- TIS 257 Part 2-2521 (1978)
Drinking water Part 2 Analysis and testing
- TIS 258-2521 (1978)
Plain washers
- TIS 259-2521 (1978)
Spring lock washers
- TIS 260-2521 (1978)
Toothed lock washers
- TIS 261-2521 (1978)
Size designation of ready-made garments
Withdrawn, 28 October B.E. 2531 (1988) and replaced by TIS 784-2531 (1988)
- TIS 262-2521 (1978)
Untrimmed stock sizes of paper
- TIS 263-2521 (1978)
Jams, jellies and marmalades
- TIS 264-2521 (1978)
Canned shrimps or prawns
- TIS 265-2521 (1978)
Zinc oxide for rubber industry
- TIS 266-2521 (1978)
Marking codes for resistors and capacitors
- TIS 267-2528 (1985)
Bicycle rims
- TIS 268-2521 (1978)
Glucose syrup
- TIS 269-2521 (1978)
Copra
- TIS 270-2521 (1978)
Dextrose monohydrate
- TIS 271-2535 (1992)
Instant noodle or pre-cooked noodle
- TIS 272-2541 (1998)
Emulsion paint
- TIS 273-2521 (1978)
Acetone
- TIS 274-2521 (1978)
Tapioca flour/starch
- TIS 275-2521 (1978)
Coconut meal or copra meal or oilcake or pellets as livestock feed
- TIS 276-2532 (1989)
Steel pipes
- TIS 277-2532 (1989)
Galvanized steel pipes
- TIS 278-2521 (1978)
Cellulose wadding
- TIS 279-2525 (1982)
Pin-type porcelain insulators
- TIS 280-2529 (1986)
Strain-type porcelain insulators
- TIS 281-2532 (1989)
Steel pipe threads for water service and general purposes
- TIS 282-2521 (1978)
Canned corned beef
- TIS 283-2534 (1991)
Printing paperboard
- TIS 284-2530 (1987)
Aluminium alloy extruded solid and hollow shapes
- TIS 285 Part 1-2521 (1978)
Methods of test for paints, varnishes and related materials Part 1 Sampling
- TIS 285 Part 2-2521 (1978)
Methods of test for paints, varnishes and related materials Part 2 Examination and preparation of samples for testing
- TIS 285 Part 3-2521 (1978)
Methods of test for paints, varnishes and related materials Part 3 Standard panels for testing
- TIS 285 Part 4-2521 (1978)
Methods of test for paints, varnishes and related materials Part 4 Application
- TIS 285 Part 5-2521 (1978)
Methods of test for paints, varnishes and related materials Part 5 Determination of film thickness
- TIS 285 Part 6-2524 (1981)
Methods of test for paints, varnishes and related materials Part 6 Determination of volatile and non-volatile matter
- TIS 285 Part 7-2524 (1981)
Methods of test for paints, varnishes and related materials Part 7 Determination of density
- TIS 285 Part 8-2524 (1981)
Methods of test for paints, varnishes and related materials Part 8 Determination of fineness of grind
- TIS 285 Part 9-2524 (1981)
Methods of test for paints, varnishes and related materials Part 9 Surface-drying test - Ballotini method
- TIS 285 Part 10-2524 (1981)
Methods of test for paints, varnishes and related materials Part 10 Hard-drying time
- TIS 285 Part 11-2524 (1981)
Methods of test for paints, varnishes and related materials Part 11 Condition in container
- TIS 285 Part 12-2524 (1981)
Methods of test for paints, varnishes and related materials Part 12 Storage stability
- TIS 285 Part 13-2524 (1981)
Methods of test for paints, varnishes and related materials Part 13 Evaluating degree of settling of paints
- TIS 285 Part 14-2524 (1981)
Methods of test for paints, varnishes and related materials Part 14 Determination of viscosity
- TIS 285 Part 15-2524 (1981)
Methods of test for paints, varnishes and related materials Part 15 Visual comparison of the colour of paints
- TIS 285 Part 16-2524 (1981)
Methods of test for paints, varnishes and related materials Part 16 Comparison of contrast ratio of paints of the same type and colour
- TIS 285 Part 17-2524 (1981)
Methods of test for paints, varnishes and related materials Part 17 Measurement of specular gloss of non-metallic paint films at 20o, 60o and 85o
- TIS 285 Part 18-2525 (1982)
Methods of test for paints, varnishes and related materials Part 18 Light fastness
- TIS 285 Part 19-2525 (1982)
Methods of test for paints, varnishes and related materials Part 19 Bending resistance
- TIS 285 Part 20-2525 (1982)
Methods of test for paints, varnishes and related materials Part 20 Washability
- TIS 285 Part 21-2525 (1982)
Methods of test for paints, varnishes and related materials Part 21 Resistance to mildew
- TIS 285 Part 22-2525 (1982)
Methods of test for paints, varnishes and related materials Part 22 Resistance to water
- TIS 285 Part 23-2526 (1983)
Methods of test for paints, varnishes and related materials Part 23 Resistance to liquids
- TIS 285 Part 24-2526 (1983)
Methods of test for paints, varnishes and related materials Part 24 Working properties
- TIS 285 Part 25-2526 (1983)
Methods of test for paints, varnishes and related materials Part 25 Determination of water
- TIS 285 Part 26-2526 (1983)
Methods of test for paints, varnishes and related materials Part 26 Wet edge time
- TIS 285 Part 27-2526 (1983)
Methods of test for paints, varnishes and related materials Part 27 Determination of lead in paint
- TIS 285 Part 28-2526 (1983)
Methods of test for paints, varnishes and related materials Part 28 Determination of mercury in paint
- TIS 285 Part 29-2527 (1984)
Methods of test for paints, varnishes and related materials Part 29 Determination of flashpoint
- TIS 285 Part 30-2527 (1984)
Methods of test for paints, varnishes and related materials Part 30 Reducibility and dilution stability
- TIS 285 Part 31-2527 (1984)
Methods of test for paints, varnishes and related materials Part 31 Skinning
- TIS 285 Part 32-2527 (1984)
Methods of test for paints, varnishes and related materials Part 32 Scratch test
- TIS 285 Part 33-2527 (1984)
Methods of test for paints, varnishes and related materials Part 33 Determination of aluminium metal content
- TIS 285 Part 34-2527 (1984)
Methods of test for paints, varnishes and related materials Part 34 Determination of pigment content
- TIS 285 Part 35-2527 (1984)
Methods of test for paints, varnishes and related materials Part 35 Analysis of red lead in pigments
- TIS 285 Part 36-2527 (1984)
Methods of test for paints, varnishes and related materials Part 36 Analysis of iron (III) oxide in pigments
- TIS 285 Part 37-2527 (1984)
Methods of test for paints, varnishes and related materials Part 37 Analysis of zinc chromate and zinc oxide in pigments
- TIS 285 Part 38-2527 (1984)
Methods of test for paints, varnishes and related materials Part 38 Absorption test
- TIS 285 Part 39-2527 (1984)
Methods of test for paints, varnishes and related materials Part 39 Knife test
- TIS 285 Part 40-2531 (1988)
Methods of test for paints, varnishes and related materials Part 40 Determination of nonvolatile vehicle
- TIS 285 Part 41-2531 (1988)
Methods of test for paints, varnishes and related materials Part 41 Determination of coarse particles and skin
- TIS 285 Part 42-2531 (1988)
Methods of test for paints, varnishes and related materials Part 42 Resistance to continuous salt spray
- TIS 285 Part 43-2531 (1988)
Methods of test for paints, varnishes and related materials Part 43 Resistance to humidity under continuous condensation
- TIS 285 Part 44-2531 (1988)
Methods of test for paints, varnishes and related materials Part 44 Non-pick-up time of traffic paint
- TIS 285 Part 45-2531 (1988)
Definitions of terms relating to paint, varnish and related materials
- TIS 285 Part 46-2539 (1996)
Methods of test for paints, varnishes and related materials Part 46 Impact resistance (resistance of organic coatings to the effects of rapid deformation)
- TIS 285 Part 47-2540 (1997)
Test methods for paints, varnishes and related materials Part 47 Cross-cut test
- TIS 285 Part 48-2539 (1996)
Methods of test for paints, varnishes and related materials Part 48 Colour of transparent liquids (gardner colour scale)
- TIS 285 Part 49-2539 (1996)
Methods of test for paints, varnishes and related materials Part 49 Viscosity of transparent liquids by bubble, method time
- TIS 286-2521 (1978)
Pictorial markings for handling of commodities or goods: general symbols
- TIS 287-2533 (1990)
Printing and writing paper
- TIS 288-2535 (1992)
Edible palm oil
- TIS 289-2521 (1978)
Keys and keyways
- TIS 290-2521 (1978)
Hacksaw blades
- TIS 291 Part 1-2530 (1987)
Hexagon head bolts : Producd grades A and B
- TIS 291 Part 2-2530 (1987)
Hexagon head bolts : Product grade B (Shank diameter pitch diameter)
- TIS 291 Part 3-2530 (1987)
Hexagon head bolts : Product grade C
- TIS 292-2522 (1979)
Canned crab meat
- TIS 293-2526 (1983)
PVC-insulated aluminium cables
- TIS 294-2522 (1979)
Cosmetics: hair sprays, aerosol type
- TIS 295-2530 (1987)
Sanitary napkins : external use
- TIS 296-2522 (1979)
Atmosphere for conditioning and testing, and standard reference temperature
- TIS 297-2529 (1986)
Black pepper and white pepper
- TIS 298-2522 (1979)
Acrylic sheets
- TIS 299-2525 (1982)
Polyester-imide enamelled round copper wires
- TIS 300-2531 (1988)
Track pins
- TIS 301-2531 (1988)
Track bushings
- TIS 302-2531 (1988)
Track links
- TIS 303-2522 (1979)
Gold ornaments
- TIS 304-2524 (1981)
Menthol
- TIS 305-2522 (1979)
Canned tomato concentrates
- TIS 306-2522 (1979)
Motorcycle spoke rims
- TIS 307-2522 (1979)
Dextrose anhydrous
- TIS 308-2522 (1979)
Copper for electrical purposes: round wire
- TIS 309-2525 (1982)
Mosquito coils and sticks
- TIS 310-2522 (1979)
Steel tubes for bicycle purposes
- TIS 311-2522 (1979)
Bicycle spokes
- TIS 312-2522 (1979)
Peppermint oil
- TIS 313-2531 (1988)
Aluminium insect wire screening
- TIS 314-2522 (1979)
Sampling method and acceptance inspection of fasteners
- TIS 315-2522 (1979)
Pre-cooked rice porridge
- TIS 316-2537 (1994)
Calcium carbide
- TIS 317-2522 (1979)
Bicycle handles
- TIS 318-2539 (1996)
Fabric adhesive plasters in roll
- TIS 319-2522 (1979)
Industrial lime
- TIS 320-2522 (1979)
Desiccated coconut
- TIS 321-2530 (1987)
Corrugating medium
- TIS 322-2522 (1979)
High speed steel tool bits
- TIS 323-2522 (1979)
Dried seasoned squid
- TIS 324-2522 (1979)
Motorcycle spokes
- TIS 325-2532 (1989)
Aluminium foils
- TIS 326-2525 (1982)
Porcelain wireholders
- TIS 327-2538 (1995)
Gloss enamel paint
- TIS 328-2523 (1980)
Aluminium priming paints for woodwork
- TIS 329-2523 (1980)
Cleaning solution, porcelain
- TIS 330-2530 (1987)
Hard tapioca pellet
- TIS 331-2523 (1980)
Aluminium and aluminium alloy plate and sheets
- TIS 332-2537 (1994)
Dry chemical portable fire extinguishers
- TIS 333-2525 (1982)
Carbon black for rubber industry
- TIS 334-2528 (1985)
Motorcycle chains
- TIS 335 Part 1-2523 (1980)
Methods for microbiological examination of canned food
- TIS 336-2538 (1995)
Crude glycerine
- TIS 337-2538 (1995)
Refined glycerine
- TIS 338 Part 1-2530 (1987)
Hexagon head screws : Product grades A and B
- TIS 338 Part 2-2530 (1987)
Hexagon head screws : Product grade C
- TIS 339 Part 1-2523 (1980)
Tolerances for ISO general purpose metric screw threads Part 1 Principles and Basic Data
- TIS 339 Part 2-2523 (1980)
Tolerances for ISO general purpose metric screw threads Part 2 Limits of sizes for commercial bolt and nut thread-Medium quality
- TIS 339 Part 3-2523 (1980)
Tolerances for ISO general purpose metric screw threads Part 3 Deviations for constructional threads
- TIS 340-2528 (1985)
Exhaust system for car, bus and truck
- TIS 341-2528 (1985)
Motorcycle exhaust muffler
- TIS 342-2523 (1980)
Bicycle mudguards
- TIS 343-2523 (1980)
Water taps
- TIS 344-2530 (1987)
Lampholders for tubular fluorescent lamps and starterholders
- TIS 345-2523 (1980)
Office steel card cabinets
- TIS 346-2527 (1984)
Ball-point pens
- TIS 347-2527 (1984)
Ball-point pen refills
- TIS 348-2540 (1997)
Low carbon steel wire rods
- TIS 349-2532 (1989)
High carbon steel wire rods
- TIS 350-2523 (1980)
Dried glucose syrup
- TIS 351-2527 (1984)
Bicycle chains
- TIS 352-2523 (1980)
Bicycle front forks
- TIS 353-2532 (1989)
Office steel storage cabinets
- TIS 354-2528 (1985)
Suspension-type porcelain insulators
- TIS 355-2526 (1983)
Ferrous pin for pin-type porcelain insulators
- TIS 356-2531 (1988)
Internal combustion engine lubricating oil
- TIS 357-2540 (1997)
Priming paints (undercoat paints) for woodwork
- TIS 358-2531 (1988)
Use and maintenance of compressed gas cylinders
- TIS 359-2530 (1987)
Pressure gas cylinders, seamless type
- TIS 360-2530 (1987)
Synthetic resin adhesives (phenolic and aminoplastic) for wood
- TIS 361-2524 (1981)
Sealing compound for batteries
- TIS 362-2526 (1983)
Pharmaceutical glass bottles for oral liquid dosage form nominal size 15 to 1 000
- TIS 363-2524 (1981)
Pharmaceutical glass bottles for oral liquid dosage form nominal size 2 000 and 4 000
- TIS 364-2524 (1981)
Bicycle chainwheels and cranks
- TIS 365-2532 (1989)
Soft solder bars and ingots
- TIS 366-2528 (1985)
Electric iron
- TIS 367 Part 1-2532 (1989)
Automobile tyres Part I Performance and testing
- TIS 367 Part 2-2532 (1989)
Automobile tyres Part II Dimensions and load capacity
- TIS 368-2538 (1995)
Industrial protective helmets
- TIS 369-2539 (1996)
Protective helmets for vehicle users
- TIS 370-2525 (1982)
Liquefied petroleum gas cylinder for internal combustion engines
- TIS 371-2530 (1987)
Cationic asphalt emulsion for road
- TIS 372-2524 (1981)
Canned rambutan stuffed with pineapple
- TIS 373-2524 (1981)
Wheat flour: cake flour
- TIS 374-2524 (1981)
Wheat flour: bread flour
- TIS 375-2524 (1981)
Wheat flour: general purpose flour
- TIS 376-2524 (1981)
Hexagon socket head cap screws: product grade A
- TIS 377-2524 (1981)
Tolerances for bolts, screws, nuts and studs
- TIS 378-2531 (1988)
Concrete flooring tiles
- TIS 379-2524 (1981)
Terrazzo flooring tiles
- TIS 380-2534 (1991)
Sizes of correspondence envelopes
- TIS 381 Part 1-2524 (1981)
Pipeline flanges for general use Part I Mating dimensions
- TIS 381 Part 2-2524 (1981)
Pipeline flanges for general use Part II Shapes and dimensions of pressure-tight surfaces
- TIS 382-2531 (1988)
Cast iron: butterfly valves
- TIS 383-2529 (1986)
Cast iron check valves: swing type
- TIS 384-2525 (1982)
Power transformers
- TIS 385-2524 (1981)
Room air conditioners
- TIS 386-2531 (1988)
Pressure-sensitive adhesive tape for electrical purposes: plasticized polyvinyl chloride
- TIS 387-2524 (1981)
Size designation of woman's and girl's underwears
Withdrawn, 28 October B.E. 2531 (1988) and replaced by TIS 784-2531 (1988)
- TIS 388-2534 (1991)
Automobile radiators
- TIS 389-2531 (1988)
Red lead based primers for iron and steel surfaces
- TIS 390-2524 (1981)
Aluminium paints
- TIS 391-2524 (1981)
Dried milk
- TIS 392-2529 (1986)
Tomato ketchup
- TIS 393-2524 (1981)
Pre-cooked rice soup
- TIS 394-2524 (1981)
Blackstrap molasses
- TIS 395-2524 (1981)
Precast reinforced concrete piles
- TIS 396-2524 (1981)
Prestressed concrete piles
- TIS 397-2524 (1981)
Reinforced spun concrete piles
- TIS 398-2537 (1994)
Prestressed spun concrete piles
- TIS 399-2524 (1981)
Precast reinforced concrete short piles
- TIS 400-2524 (1981)
Rice vermicelli
- TIS 401-2534 (1991)
Zinc chromate primer
- TIS 402-2532 (1989)
Calcium carbonate for rubber industry
- TIS 403-2532 (1989)
Calcium carbonate for paint and plastic industries
- TIS 404-2540 (1997)
Galvanized steel wire strands
- TIS 405-2525 (1982)
General principles of manual for use and maintenance of portable fire extinguishers
- TIS 406-2525 (1982)
Aluminium and aluminium alloys for electrical purposes: general properties
- TIS 407-2525 (1982)
Aluminium and aluminium alloys for electrical purposes: round rod
- TIS 408-2525 (1982)
Copper for electrical purposes: rod and bar
- TIS 409-2525 (1982)
Test method for compressive strength of concrete specimens
- TIS 410-2525 (1982)
Stainless steel wares: spoons, forks and knives
- TIS 411-2525 (1982)
Slotted cheese (flat fillister) head screws
- TIS 412-2525 (1982)
Slotted countersunk (flat) head screws
- TIS 413-2525 (1982)
Slotted raised countersunk (oval) head screws
- TIS 414-2525 (1982)
Slotted pan head screws
- TIS 415-2541 (1998)
Traffic paint
- TIS 416-2525 (1982)
The classification of electrical insulating materials
- TIS 417-2525 (1982)
Pharmaceutical glass bottles for oral tablet
- TIS 418-2525 (1982)
Transmission roller chains
- TIS 419-2525 (1982)
Bicycle threads
- TIS 420-2540 (1997)
Uncoated seven-wire stress-relieved strand for prestressed concrete
- TIS 421-2525 (1982)
Sawn timber: general
- TIS 422-2530 (1987)
Teak conversions
- TIS 423-2530 (1987)
Sawn hardwood timber (nonteak)
- TIS 424-2530 (1987)
Structural timber
- TIS 425-2525 (1982)
Frozen pineapple
- TIS 426-2525 (1982)
PVC coated vinylon fabric
- TIS 427-2531 (1988)
Electrically welded steel water pipe
- TIS 428-2525 (1982)
Frozen cuttle fish, squid and octopus
- TIS 429-2525 (1982)
Curry paste and dried curry paste
- TIS 430-2525 (1982)
Canned baby clam
- TIS 431-2529 (1986)
Copper alloy gate valves
- TIS 432-2529 (1986)
Cast iron gate valves for general purposes
- TIS 433-2539 (1996)
Liquid sodium silicates for industry
- TIS 434-2525 (1982)
Canned squid, cuttlefish and octopus
- TIS 435-2525 (1982)
Reinforced plastic water tanks
- TIS 436-2525 (1982)
Steel index card cabinets
- TIS 437-2529 (1986)
Fire resistance safes: door type
- TIS 438-2525 (1982)
Cotton socks
- TIS 439-2525 (1982)
Nylon socks
- TIS 440 Part 1-2525 (1982)
Architectural and building drawings Part 1 General
- TIS 440 Part 2-2526 (1983)
Architectural and building drawings Part 2 Structural metal work
- TIS 440 Part 3-2532 (1989)
Construction drawing practice Part 3 concrete reinforcement
- TIS 441-2525 (1982)
Compressed straw building board
- TIS 442-2525 (1982)
Wood wool cement board
- TIS 443-2525 (1982)
Cosmetics: skin powders
- TIS 444-2530 (1987)
Bean vermicelli
- TIS 445-2530 (1987)
Hollow concrete blocks for concrete composite floors
- TIS 446 Part 1-2525 (1982)
Diagrams, charts, tables Part 1 Definitions and classification
- TIS 446 Part 2-2525 (1982)
Diagrams, charts, tables Part 2 Item designation
- TIS 446 Part 3-2526 (1983)
Diagrams, charts, tables Part 3 General recommendations for the preparation of diagrams
- TIS 446 Part 4-2532 (1989)
Diagrams, charts, tables Part 4 Recommendations for the preparation of circuit diagrams
- TIS 447-2525 (1982)
Sampling method for textile fibres
- TIS 448-2525 (1982)
Welding cables
- TIS 449-2530 (1987)
Suspended ceiling steel grids
- TIS 450-2528 (1985)
Liquefied petroleum gases
- TIS 451-2526 (1983)
Stainless steel wares: plates, cups, bowls and trays
- TIS 452-2526 (1983)
Letter press and offset printing inks
- TIS 453-2526 (1983)
Assembly tools for screws and nuts-nomenclature
- TIS 454-2526 (1983)
Safety isolating transformers
- TIS 455-2537 (1994)
Household refrigerators
- TIS 456-2526 (1983)
Dried chillies
- TIS 457-2526 (1983)
Ground chilli
- TIS 458-2526 (1983)
Dried ginger
- TIS 459-2526 (1983)
Salted ginger
- TIS 460-2526 (1983)
Green tea
- TIS 461-2526 (1983)
Black tea
- TIS 462-2533 (1990)
Precooked or dehydrated soups
- TIS 463-2538 (1995)
Sorbitol solution
- TIS 464-2535 (1992)
Citric acid
- TIS 465-2527 (1984)
Sampling plans and procedures for inspection by attributes
- TIS 466-2529 (1986)
Turpentine
- TIS 467-2526 (1983)
Cosmetics: powder lotion
- TIS 468-2526 (1983)
White spirit for paints and varnishes
- TIS 469-2526 (1983)
Cement paint
- TIS 470-2526 (1983)
Honey
- TIS 471-2526 (1983)
Ball peen hammers
- TIS 472-2526 (1983)
Motorcycle chainwheels
- TIS 473-2526 (1983)
Antimony
- TIS 474-2526 (1983)
Liquid detergents for dishwashing
- TIS 475-2526 (1983)
Macaroni products
- TIS 476-2528 (1985)
Stencil paper
- TIS 477-2526 (1983)
Cosmetics: cleansing creams and cleansing lotions
- TIS 478-2526 (1983)
Cosmetics: creams and skin lotions
- TIS 479-2541 (1998)
Concrete joint sealer, hot-poured elastic type
- TIS 480-2526 (1983)
Rosin
- TIS 481-2526 (1983)
Stearic acid
- TIS 482-2526 (1983)
Oleic acid
- TIS 483-2526 (1983)
Coconut fatty acid
- TIS 484-2526 (1983)
Soybean fatty acid
- TIS 485-2526 (1983)
Chinaclay for ceramic industry
- TIS 486-2527 (1984)
Glasswool
- TIS 487-2526 (1983)
Glasswool boards
- TIS 488-2526 (1983)
Glasswool pipe
- TIS 489-2526 (1983)
Designation of yarns
- TIS 490-2526 (1983)
Link clips for electrical wiring
- TIS 491-2526 (1983)
Toothpicks
- TIS 492-2527 (1984)
Canned tropical fruit cocktail or canned fruit salad
- TIS 493-2527 (1984)
Gummed paper tape
- TIS 494-2526 (1983)
Woven flannelette
- TIS 495-2526 (1983)
Plastic buckets
- TIS 496-2526 (1983)
Lacquer thinner
- TIS 497-2526 (1983)
Kiln-dried sawn timber
- TIS 498-2527 (1984)
Jute twine
- TIS 499-2526 (1983)
Slotted head wood screws
- TIS 500-2526 (1983)
Gasolines
Withdrawn, 26 December B.E. 2538 (1995)
- TIS 501-2527 (1984)
Test methods for chemical resistance of pharmaceutical glass containers
- TIS 502-2527 (1984)
Ampoules for injection preparations
- TIS 503-2530 (1987)
Glass tubing vial for injection preparations
- TIS 504-2527 (1984)
Wooden frames and panel frames for door and window
- TIS 505-2527 (1984)
Rubber hot water bag
- TIS 506-2527 (1984)
Fuses for domestic and similar purposes: fuse-link
- TIS 507-2527 (1984)
Fuses for domestic and similar purposes: fuse holder
- TIS 508-2527 (1984)
Compressed aluminium hydroxide gel for pharmaceutical industry
- TIS 509-2527 (1984)
Dried aluminium hydroxide gel for pharmaceutical industry
- TIS 510-2527 (1984)
Preferred numbers and series of preferred numbers
- TIS 511-2527 (1984)
Guide to the use of preferred numbers and of series of preferred numbers
- TIS 512-2527 (1984)
Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers
- TIS 513-2527 (1984)
Classification of degrees of protection provided by enclosures
- TIS 514-2531 (1988)
Steel wire ropes
- TIS 515-2539 (1996)
Water-borne wood preservatives
- TIS 516-2531 (1988)
Impregnated sawn timber by CCA compositions
- TIS 517-2527 (1984)
Plastics bottles for pharmaceutical tablets and capsules
- TIS 518-2527 (1984)
Fire resistant filing cabinet
- TIS 519-2527 (1984)
Canned mango nectar
- TIS 520(1)-2527 (1984)
Automotive nitrocellulose lacquer thinner
- TIS 521-2527 (1984)
Rubber-based adhesive
- TIS 522-2527 (1984)
Roasted coffee
- TIS 523-2528 (1985)
Leather safety footwear
- TIS 524-2539 (1996)
Melamine utensils
- TIS 525-2539 (1996)
Industrial methanol
- TIS 526-2527 (1984)
Miniature fuses: fuse-link
- TIS 527-2527 (1984)
Miniature fuses: fuse-holders
- TIS 528-2540 (1997)
Hot-rolled carbon steel coil, strip, plate and sheet of commercial and drawing qualities
- TIS 529-2527 (1984)
Umbrella cloth
- TIS 530-2527 (1984)
Formaldehyde solution (formalin)
- TIS 531-2536 (1993)
Plastics containers for sterile pharmaceutical products
- TIS 532-2527 (1984)
Glass bottles for sterile pharmaceutical products nominal size 500 and 1 000
- TIS 533-2530 (1987)
Cast iron spigot and socket soil, waste and ventilating pipes
- TIS 534-2527 (1984)
Knitted flannelettes
- TIS 535-2540 (1997)
Concrete roofing tiles
- TIS 536-2527 (1984)
Grey cast iron
- TIS 537-2527 (1984)
Spheroidal graphite cast iron
- TIS 538-2540 (1997)
Single-use sterile surgical rubber gloves
- TIS 539-2527 (1984)
Carbon dioxide for medical use
- TIS 540-2527 (1984)
Oxygen for medical use
- TIS 541-2527 (1984)
Industrial oxygen
- TIS 542-2530 (1987)
Thermoplastic road marking materials
- TIS 543-2528 (1985)
Glass beads for use with road marking material
- TIS 544-2528 (1985)
Electroplating: nickel
- TIS 545-2528 (1985)
Carbon paper
- TIS 546-2540 (1997)
Waterproof abrasive papers
- TIS 547-2532 (1989)
Fireclay refractory bricks
- TIS 548-2530 (1987)
High-alumina refractory bricks
- TIS 549-2528 (1985)
Refractory concretes
- TIS 550-2528 (1985)
Corrugated fibreboard boxes
- TIS 551-2528 (1985)
Basic refractory bricks: chrome bricks
- TIS 552-2528 (1985)
Basic refractory bricks: magnesite bricks
- TIS 553-2528 (1985)
Basic refractory bricks: chrome-magnesite and magnesite-chrome bricks
- TIS 554-2528 (1985)
Insulating firebricks
- TIS 555-2528 (1985)
Polyethylene plastic sheeting for reservoir lining
- TIS 556-2528 (1985)
Refractory mortars
- TIS 557-2528 (1985)
Shapes and sizes of refractory bricks
- TIS 558 Part 1-2528 (1985)
Test method for refractory material Part 1 Measurement of brick size
- TIS 558 Part 2-2528 (1985)
Test method for refractory material Part 2 Measurement of warpage of brick
- TIS 558 Part 3-2528 (1985)
Test method for refractory material Part 3 Pyrometric cone equivalent (PCE)
- TIS 558 Part 4-2528 (1985)
Test method for refractory material Part 4 Panel spalling testing refractory brick
- TIS 558 Part 5-2528 (1985)
Test method for refractory material Part 5 Load testing refractory brick at high temperature
- TIS 558 Part 6-2528 (1985)
Test method for refractory material Part 6 Reheat change of refractory material
- TIS 558 Part 7-2528 (1985)
Test method for refractory material Part 7 Cold crushing strength
- TIS 558 Part 8-2528 (1985)
Test method for refractory material Part 8 Modulus of rupture
- TIS 558 Part 9-2528 (1985)
Test method for refractory material Part 9 Bulk density, apparent porosity, water absorption, and apparent specific gravity
- TIS 558 Part 10-2528 (1985)
Test method for refractory material Part 10 Chemical analysis of fireclay refractory brick
- TIS 558 Part 11-2528 (1985)
Test method for refractory material Part 11 Chemical analysis of high alumina refractory brick
- TIS 559-2528 (1985)
Silicone-based water repellents for masonry
- TIS 560-2528 (1985)
Oil wood preservatives: coal tar creosote
- TIS 561-2528 (1985)
Nitrocellulose lacquer enamel
- TIS 562-2530 (1987)
Clear nitrocellulose lacquer
- TIS 563-2528 (1985)
Suspension-type toughened glass insulators
- TIS 564-2529 (1986)
Ceramic ware in contact with food : porcelain tableware
- TIS 565-2528 (1985)
Hard drawn steel wires
- TIS 566-2528 (1985)
Concrete aggregates
- TIS 567-2528 (1985)
Separators for lead-acid batteries
- TIS 568-2540 (1997)
Industrial carbon dioxide
- TIS 569-2528 (1985)
Sodium tripolyphosphate for industrial use
- TIS 570-2528 (1985)
Elastic webbing
- TIS 571-2528 (1985)
Bicycle tyres
- TIS 572-2528 (1985)
A.C. electric double-oscillating type fans
- TIS 573-2528 (1985)
Instant coffee
- TIS 574-2528 (1985)
Glass liquor bottles: pilferproof finish
- TIS 575-2535 (1992)
Flexible polyvinyl chloride plastic sheeting for reservoir lining
- TIS 576-2531 (1988)
Precast concrete slabs for concrete floor systems
- TIS 577-2531 (1988)
Test method for loading capacity of precast concrete slabs and concrete floor systems
- TIS 578-2540 (1997)
Methods of analysis and test for laundry detergent powder
- TIS 579-2528 (1985)
Seasoned salted chinese radish
- TIS 580-2528 (1985)
Transmission roller chain wheels
- TIS 581-2528 (1985)
Cross and straight peen hammers
- TIS 582-2531 (1988)
Coconut milk
- TIS 583-2528 (1985)
Coconut milk powder
- TIS 584-2528 (1985)
Instant ginger
- TIS 585-2528 (1985)
Green coffee
- TIS 586-2528 (1985)
Dried bananas
- TIS 587-2528 (1985)
Freight containers: designation
- TIS 588-2528 (1985)
Wooden flat pallets
- TIS 589-2528 (1985)
Transport packages: designation
- TIS 590-2528 (1985)
Frozen chicken
- TIS 591-2528 (1985)
Brake fluid
- TIS 592-2528 (1985)
Paper cones and tubes
- TIS 593-2530 (1987)
Steel rolling shutters: manual type
- TIS 594-2528 (1985)
Preferred number series for resistors and capacitors
- TIS 595-2528 (1985)
Gypsum
- TIS 596-2531 (1988)
Door bolts: extruded brass and extruded aluminium
- TIS 597-2528 (1985)
Rods and wires for gas-shielded arc welding of mild steel
- TIS 598-2528 (1985)
Mortar for unit masonry
- TIS 599-2528 (1985)
Glass tubing for fluorescent lamps
- TIS 600-2528 (1985)
Ground dried ginger
- TIS 601-2529 (1986)
Ceramic ware in contact with food: earthenware tableware
- TIS 602-2529 (1986)
Ceramic ware in contact with food: stoneware tableware
- TIS 603-2529 (1986)
Ceramic ware in contact with food: glass tableware
- TIS 604-2529 (1986)
Cast iron pipe fittings
- TIS 605-2529 (1986)
Washing powder
- TIS 606-2529 (1986)
Reflective sheeting
- TIS 607-2535 (1992)
Vinyl antifouling paint
- TIS 608-2529 (1986)
Automotive nitrocellulose lacquer: top coat
- TIS 609-2529 (1986)
Automotive nitrocellulose lacquer: primer surfacer or surfacer
- TIS 610-2529 (1986)
Paint remover
- TIS 611-2529 (1986)
Glass spectacle lenses
- TIS 612-2529 (1986)
Glass fibre reinforced polyester corrugated sheets
- TIS 613-2529 (1986)
Glazed ceramic tiles for internal walls
- TIS 614-2529 (1986)
Ceramic tiles for external walls
- TIS 615-2529 (1986)
Claw hammers
- TIS 616-2529 (1986)
Frozen fish fillets
- TIS 617-2529 (1986)
Frozen whole fish
- TIS 618-2529 (1986)
Binders for paints and varnishes: alkyd resins
- TIS 619-2529 (1986)
Pressure sensitive adhesive crepe masking tapes
- TIS 620-2533 (1990)
Thai character code for computers
- TIS 621-2529 (1986)
Building and sanitary asbestos cement pipes
- TIS 622-2529 (1986)
Sewerage and drainage asbestos cement pipes
- TIS 623-2529 (1986)
Measurement of luminous flux of fluorescent lamps and incandescent lamps
- TIS 624-2529 (1986)
Measurement of light source colour
- TIS 625-2534 (1991)
Rubber condoms
- TIS 626-2529 (1986)
Bicycle carriers
- TIS 627-2529 (1986)
Bicycle stands
- TIS 628-2529 (1986)
Bicycle chaincases
- TIS 629-2529 (1986)
Bicycle bottom-bracket axles
- TIS 630-2531 (1988)
Bicycle freewheels
- TIS 631-2529 (1986)
Bicycle pedals
- TIS 632-2538 (1995)
Polyvinyl chloride resin
- TIS 633-2531 (1988)
Rubber rolls for paddy dehuskers
- TIS 634-2529 (1986)
Beeswax
- TIS 635 Part 1-2529 (1986)
Safety colours and safety signs Part 1 Colour and design
- TIS 635 Part 2-2529 (1986)
Safety colours and safety signs Part 2 Colorimetric and photometric properties of materials
- TIS 636-2529 (1986)
Aluminium collapsible tubes
- TIS 637-2529 (1986)
Corn starch
- TIS 638-2529 (1986)
White rice flour
- TIS 639-2529 (1986)
Glutinous rice flour
- TIS 640-2533 (1990)
Ethanol
- TIS 641-2529 (1986)
Sesame
- TIS 642-2529 (1986)
Rubber hoses for compressed air
- TIS 643-2529 (1986)
Malleable cast iron
- TIS 644-2529 (1986)
Hot-rolled steel bars for cold - finished steel bars
- TIS 645-2529 (1986)
Canned mackerel
- TIS 646-2529 (1986)
Bicycle saddles
- TIS 647-2529 (1986)
Symbols for indications appearing on machine tools
- TIS 648-2529 (1986)
Mosquito repellants
- TIS 649-2529 (1986)
Black leads for pencils
- TIS 650-2529 (1986)
Black lead pencils
- TIS 651-2535 (1992)
Tubes of automobile tyres
- TIS 652-2532 (1989)
Bicycle rubber inner tubes
- TIS 653-2529 (1986)
Plastics containers and packaging films for milk and milk products
- TIS 654-2536 (1993)
Plastics containers and packaging films for edible oils and fats
- TIS 655-2529 (1986)
Plastics utensils for food
- TIS 656-2529 (1986)
Methods of analysis for plastics products used for food contact
- TIS 657-2529 (1986)
Distributors for automobiles
- TIS 658-2529 (1986)
Rubber hose for coolant system
- TIS 659-2529 (1986)
Slotted steel angles
- TIS 660-2529 (1986)
Aluminium ladders
- TIS 661-2530 (1987)
Office furniture: functional sizes
- TIS 662-2530 (1987)
Domestic furniture: functional sizes
- TIS 663-2530 (1987)
Educational institution furniture: functional sizes
- TIS 664-2530 (1987)
Instant chrysanthemum
- TIS 665-2530 (1987)
Calcium chloride
- TIS 666-2530 (1987)
Starter motors for automobiles
- TIS 667-2530 (1987)
Cross-recessed head screws
- TIS 668-2530 (1987)
Slotted head tapping screws
- TIS 669-2530 (1987)
Cross-recessed head tapping screws
- TIS 670-2530 (1987)
Hexagon head tapping screws
- TIS 671-2530 (1987)
Hexagon socket set screws
- TIS 672-2530 (1987)
Hexagon nuts
- TIS 673-2530 (1987)
Ballasts for high pressure mercury vapour lamps
- TIS 674-2539 (1996)
Reflective traffic sign
- TIS 675-2530 (1987)
Bicycle bottom bracket shells
- TIS 676-2530 (1987)
Bicycle bottom bracket shell cups
- TIS 677-2530 (1987)
Bicycle bottom bracket shell lock rings
- TIS 678-2530 (1987)
Bicycle bells
- TIS 679-2530 (1987)
Bicycle hubs
- TIS 680-2530 (1987)
Bicycle brakes
- TIS 681-2530 (1987)
Polyvinyl chloride coated fabric
- TIS 682-2540 (1997)
Motorcycle tyres
- TIS 683-2530 (1987)
Motorcycle rubber inner tubes
- TIS 684-2530 (1987)
Lacquer for toys
- TIS 685 Part 1-2540 (1997)
Toys Part 1 General requirements
- TIS 685 Part 2-2540 (1997)
Toys Part 2 Packages and labelling
- TIS 685 Part 3-2540 (1997)
Toys Part 3 Methods of test and analysis
- TIS 686-2530 (1987)
Plastics containers for ophthalmics
- TIS 687-2530 (1987)
Automotive lamps
- TIS 688-2530 (1987)
Rosin flux cored solder wires
- TIS 689-2530 (1987)
Di-2-ethylhexyl phthalate
- TIS 690-2530 (1987)
Valves for internal combustion engines
- TIS 691-2530 (1987)
Epoxy paint
- TIS 692-2530 (1987)
Sulphur
- TIS 693-2530 (1987)
Pantograph screw jack for automobile
- TIS 694-2532 (1989)
Pre-cooked rice vernicelli or instant rice vernicelli
- TIS 695-2530 (1987)
Fire hose: collapsible hose
- TIS 696-2530 (1987)
Hard candies and toffees
- TIS 697-2530 (1987)
Weather strips for automobile
- TIS 698-2530 (1987)
Plastics tape yarn woven fabric
- TIS 699-2530 (1987)
Cross-recessed head wood screws
- TIS 700-2530 (1987)
Fish floss, fish flake and dried ground fish
- TIS 701-2530 (1987)
Chip or cracker
- TIS 702-2530 (1987)
Patient trolleys
- TIS 703-2530 (1987)
Copper-clad laminated sheet for printed circuits: phenolic cellulose paper
- TIS 704-2530 (1987)
Copper-clad laminated sheet for printed circuits: epoxide cellulose paper
- TIS 705-2530 (1987)
Copper-clad laminated sheet for printed circuits: epoxide woven glass fabric
- TIS 706-2530 (1987)
Knife switches with cover
- TIS 707-2530 (1987)
Water colours for art education
- TIS 708-2530 (1987)
Clutch discs for automobiles
- TIS 709-2530 (1987)
Automobile windshield wiper motors
- TIS 710-2530 (1987)
A.C. electric ventilating type fans
- TIS 711-2530 (1987)
Polyethylene plastic film for agriculture
- TIS 712-2530 (1987)
Polyvinyl chloride plastic film for agriculture
- TIS 713-2530 (1987)
Lubricating grease
- TIS 714-2530 (1987)
Head restraints for automobile occupants
- TIS 715-2530 (1987)
Reflective plates for making license plates
- TIS 716-2532 (1989)
Staples
- TIS 717-2530 (1987)
Staplers
- TIS 718-2530 (1987)
Stationary lead acid storage batteries
- TIS 719-2530 (1987)
Motorcycle batteries
- TIS 720-2536 (1993)
Blood transfusion sets
- TIS 721-2539 (1996)
Seat belt for automobiles
- TIS 722-2530 (1987)
Cylinder head gaskets for automobile engines
- TIS 723-2530 (1987)
Anhydrous sodium sulphate for industrial use
- TIS 724-2530 (1987)
Teak spliced veneer
- TIS 725-2530 (1987)
Aluminium alloy stranded conductors
- TIS 726-2530 (1987)
Basic chromium sulphate (for tanning)
- TIS 727-2540 (1997)
Coal-tar epoxy paint
- TIS 728-2530 (1987)
Piano wire rods
- TIS 729-2530 (1987)
Sacks manufactured from woven plastic tape yarn
- TIS 730-2530 (1987)
Covered electrodes for arc welding of stainless steel
- TIS 731-2532 (1989)
Covered electrodes for depositing on steel surface
- TIS 732-2531 (1988)
Covered electrodes for arc welding of cast iron
- TIS 733-2530 (1987)
Chemical admixtures for concrete
- TIS 734-2530 (1987)
Amino/alkyd resin baking enamel
- TIS 735-2533 (1990)
Lacquer for food container
- TIS 736-2530 (1987)
Phosphatizing compounds under painting
- TIS 737-2531 (1988)
Welded steel wire fabric for concrete reinforcement
- TIS 738-2530 (1987)
Fresh whole milk
- TIS 739-2530 (1987)
Dyestuffs: direct dyes
- TIS 740-2530 (1987)
Dyestuffs: reactive dyes
- TIS 741-2530 (1987)
Castor oil for resin, paint and varnish industries
- TIS 742-2538 (1995)
Biscuits, crackers and cookies
- TIS 743-2530 (1987)
Edible ground nut oils
- TIS 744-2530 (1987)
Metal frames and panel frames for doors and windows: aluminium windows
- TIS 745-2530 (1987)
Asphalt-base emulsions for use as material coatings
- TIS 746-2530 (1987)
Water suction and discharge rubber hoses
- TIS 747-2531 (1988)
Cold-drawn steel wire for concrete reinforcement
- TIS 748-2531 (1988)
Kerosene cans
- TIS 749-2531 (1988)
Rubber soles
- TIS 750-2531 (1988)
Soybean oil for resin, paint and varnish industries
- TIS 751-2531 (1988)
Automotive lacquer putty: nitrocellulose
- TIS 752-2531 (1988)
Dried chrysanthemum flowers
- TIS 753-2531 (1988)
Liquid drycleaning detergent
- TIS 754-2531 (1988)
Drycleaning solvent
- TIS 755-2531 (1988)
Powdered sugar (icing sugar)
- TIS 756-2535 (1992)
Cylindrical locks
- TIS 757-2531 (1988)
Padlocks
- TIS 758-2531 (1988)
Newsprint
- TIS 759-2531 (1988)
Hinges for doors and windows: butt hinges
- TIS 760-2531 (1988)
Dyestuffs: vat dyes
- TIS 761 Part 1-2531 (1988)
Modular coordination Part 1 Vocabulary
- TIS 761 Part 2-2531 (1988)
Modular coordination Part 2 Basic module
- TIS 761 Part 3-2531 (1988)
Modular coordination Part 3 Multimodules for horizontal coordinating dimensions
- TIS 761 Part 4-2531 (1988)
Modular coordination Part 4 Storey heights and room heights
- TIS 761 Part 5-2534 (1991)
Modular coordination Part 5 Principles and rules
- TIS 761 Part 6-2534 (1991)
Modular coordination Part 6 Series of preferred multimodular sizes for horizontal dimensions
- TIS 761 Part 7-2534 (1991)
Modular coordination Part 7 Sub-modular increments
- TIS 761 Part 8-2539 (1996)
Modular co-ordination: Part 8 Stairs-Vocabulary
- TIS 761 Part 9-2539 (1996)
Modular co-ordination: Part 9 Stairs and stair openings - Co-ordinating dimensions
- TIS 761 Part 10-2539 (1996)
Modular co-ordination: Part 10 Co-ordinating sizes for doorsets-external and internal
- TIS 762-2531 (1988)
Magnetic switches of starter motors for automobiles
- TIS 763-2531 (1988)
Square and hexagon head wood screws
- TIS 764-2536 (1993)
Scalp vein set
- TIS 765-2531 (1988)
Sanding sealer
- TIS 766-2531 (1988)
Textile care labelling code
- TIS 767-2531 (1988)
Aluminium electrolytic capacitors for electronic application
- TIS 768-2531 (1988)
Axial flow rice threshers
- TIS 769-2533 (1990)
Mosquito nets
- TIS 770-2533 (1990)
Zinc coated steel conduits for electrical wiring
- TIS 771-2531 (1988)
Electric horns for automobiles and motorcycles
- TIS 772-2531 (1988)
Alternators for automobiles
- TIS 773-2531 (1988)
Artificial flowers
- TIS 774-2531 (1988)
Fluorspar (fluorite)
- TIS 775-2531 (1988)
Asphalt compound for automobile underbody coating
- TIS 776-2531 (1988)
Plastic drinking straw
- TIS 777-2536 (1993)
Single-use syringes (sterile) for general medical use
- TIS 778-2531 (1988)
Frame sets for adjustable louvre window
- TIS 779-2531 (1988)
Correspondence envelopes
- TIS 780-2531 (1988)
Agar
- TIS 781-2539 (1996)
Hitch point for walk-behind tractors
- TIS 782-2539 (1996)
Hitch pins for walk-behind tractors
- TIS 783-2539 (1996)
Wheel flanges for walk-behind tractors
- TIS 784 Part 1-2531 (1988)
Size designation of garments Part 1 Children
- TIS 784 Part 2-2531 (1988)
Size designation of garments Part 2 Women
- TIS 784 Part 3-2531 (1988)
Size designation of garments Part 3 Men
- TIS 785-2531 (1988)
Industrial leather gloves
- TIS 786-2531 (1988)
White body coatings of passenger cars
- TIS 787-2531 (1988)
Small size water cooled diesel engines
- TIS 788-2531 (1988)
Air filters for internal combustion engines
- TIS 789-2531 (1988)
Aluminiumware
- TIS 790-2531 (1988)
Sleeve type half bearing for automobile engines
- TIS 791-2531 (1988)
Vitreous china sanitary appliances: wash basins
- TIS 792-2531 (1988)
Vitreous china sanitary appliances: water closet bowls
- TIS 793-2531 (1988)
Vitreous china sanitary appliances: flushing cisterns and covers
- TIS 794-2531 (1988)
Vitreous china sanitary appliances: squatting water-closet pans
- TIS 795-2531 (1988)
Vitreous china sanitary appliances: urinals
- TIS 796-2531 (1988)
Vitreous china sanitary appliances: bidets
- TIS 797-2531 (1988)
Vitreous china sanitary appliances: bathroom accessories
- TIS 798-2531 (1988)
Chrysanthemum concentrate
- TIS 799-2531 (1988)
Gelatin
- TIS 800-2531 (1988)
Door weather strips for automobiles
- TIS 801-2531 (1988)
Tubular steel scaffolding: prefabricated frame type
- TIS 802-2531 (1988)
Agar dessert powder and gelatin dessert powder
- TIS 803-2531 (1988)
Steel wire ropes for lifts
- TIS 804-2531 (1988)
Steel wire ropes for mine hoisting purposes
- TIS 805-2540 (1997)
Liquefied petroleum gas pressure regulators: low pressure
- TIS 806-2531 (1988)
Fuel level gauges for automobiles: sending unit
- TIS 807-2531 (1988)
Ignition coils for automobiles
- TIS 808-2531 (1988)
Stainless steel wares: pots, pans, bowls, turners, ladles and dippers
- TIS 809-2531 (1988)
Rubber boots
- TIS 810-2531 (1988)
Polyvinyl chloride boots
- TIS 811-2531 (1988)
Automotive V-belts
- TIS 812-2531 (1988)
Motor-compressors
- TIS 813-2531 (1988)
Body parts of passenger cars
- TIS 814-2531 (1988)
White bodies of passenger cars
- TIS 815-2531 (1988)
Polyester staple fibre
- TIS 816-2538 (1995)
Polyethylene resin
- TIS 817-2531 (1988)
Bicycle lighting sets
- TIS 818-2531 (1988)
Power maize shellers
- TIS 819-2531 (1988)
Lampholders: Edison screw type
- TIS 820-2538 (1995)
Layout of Thai character keys on computer keyboards
- TIS 821-2531 (1988)
Water base marking pens
- TIS 822-2531 (1988)
Oil base marking pens
- TIS 823-2531 (1988)
Brake drums for automobiles
- TIS 824-2531 (1988)
Electrical switches
- TIS 825-2531 (1988)
Polyethylene ropes
- TIS 826-2531 (1988)
Cement mortar flooring tiles
- TIS 827-2531 (1988)
Interlocking concrete paving blocks
- TIS 828-2531 (1988)
Precast concrete elements for composite floor system
- TIS 829-2531 (1988)
Metal frames and panel frames for doors and windows: aluminium doors
- TIS 830-2531 (1988)
Fuel tanks for passenger cars
- TIS 831-2531 (1988)
Carbon steel castings
- TIS 832-2532 (1989)
Pre-cooked or instant rice noodle
- TIS 833-2531 (1988)
Industrial nitrocellulose
- TIS 834-2531 (1988)
Automotive putty: polyester
- TIS 835-2531 (1988)
Domestic enamelware
- TIS 836-2534 (1991)
Polystyrene resin
- TIS 837-2531 (1988)
Passenger lifts and goods lifts: construction
- TIS 838-2531 (1988)
Control cable
- TIS 839-2532 (1989)
Hydraulic brake hose for road vehicles: rubber hose
- TIS 840-2532 (1989)
Curry powder
- TIS 841-2532 (1989)
Liquid compounds for curing concrete
- TIS 842-2532 (1989)
Precooked or instant Kuai Chap (rolled rice chip)
- TIS 843-2532 (1989)
Symbols for controls, indicators and tell-tales of road vehicles
- TIS 844-2532 (1989)
Bicycles
- TIS 845-2532 (1989)
Anionic asphalt emulsion
- TIS 846-2532 (1989)
Barium sulphate for industrial use
- TIS 847-2532 (1989)
Magnesium hydroxide paste for pharmaceutical industrial
- TIS 848-2532 (1989)
Ham
- TIS 849-2532 (1989)
Portland pozzolan cement
- TIS 850-2532 (1989)
Pozzolan
- TIS 851-2532 (1989)
Asphalt cement for use in pavement construction
- TIS 852-2532 (1989)
Hoes
- TIS 853-2532 (1989)
Hydraulic shock absorbers (Telescopic type)
- TIS 854-2536 (1993)
Stainless steel sinks
- TIS 855-2532 (1989)
Boilers: general construction
- TIS 856-2532 (1989)
Copper alloy castings
- TIS 857-2532 (1989)
Copper alloy ingots
- TIS 858-2532 (1989)
A guide to copper alloy selection
- TIS 859-2532 (1989)
Piano wires
- TIS 860-2532 (1989)
High tensile strength carbon steel castings and low alloy steel castings
- TIS 861-2532 (1989)
Marking of insulated conductors
- TIS 862-2532 (1989)
Window hinges: friction hinges
- TIS 863-2532 (1989)
Steel frame systems for ceiling and wall panel
- TIS 864-2532 (1989)
Cold-finished steel bars
- TIS 865-2532 (1989)
Cut-back asphalt
- TIS 866-2532 (1989)
Single phase induction motors
- TIS 867-2532 (1989)
Three-phase induction motors
- TIS 868-2532 (1989)
Alternating current generator (excluding prime movers)
- TIS 869-2532 (1989)
Automotive wheels: steel
- TIS 870-2532 (1989)
Electric stoves; open type heating elements: safety requirements
- TIS 871-2532 (1989)
Shuttles
- TIS 872-2532 (1989)
Throwaway type oil filters for automobile
- TIS 873-2532 (1989)
Air-entraining admixtures for mortar
- TIS 874-2532 (1989)
Air-entraining admixtures for concrete
- TIS 875-2540 (1997)
Liquefied petroleum gas pressure regulators: high pressure
- TIS 876-2532 (1989)
Flat pressed particleboards: medium density
- TIS 877-2532 (1989)
Extrusion pressed particleboards: medium density
- TIS 878-2537 (1994)
Cement bonded particleboards: high density
- TIS 879-2532 (1989)
Gas lighters
- TIS 880-2532 (1989)
Float glass
- TIS 881-2532 (1989)
Portable fire extinguishers: carbon dioxide
- TIS 882-2532 (1989)
Portable fire extinguishers: Foam
- TIS 883-2532 (1989)
Acrylic resin baking enamel
- TIS 884-2532 (1989)
Electroplating: tin
- TIS 885-2532 (1989)
AC supplied electronic ballasts for tubular fluorescent lamps: safety requirements
- TIS 886-2532 (1989)
Rubber bands
- TIS 887-2532 (1989)
Service lifts: construction
- TIS 888-2532 (1989)
Small rice mill
- TIS 889-2532 (1989)
Glass bottles for injection preparations and sterile pharmaceutical products, nominal size not more than 300
- TIS 890-2532 (1989)
Dried turmeric
- TIS 891-2532 (1989)
Fermented soy bean (bean paste)
- TIS 892-2532 (1989)
Polyurethane coated fabric
- TIS 893-2532 (1989)
Rubber brake blocks for rice whitener machine
- TIS 894-2532 (1989)
Metal frames and panel frames for doors and windows: steel doors and windows
- TIS 895-2532 (1989)
Liquefied petroleum gas rubber hose: vapour phase
- TIS 896-2532 (1989)
Automobile seats
- TIS 897-2539 (1996)
Hydrogen peroxide for industrial use
- TIS 898-2532 (1989)
Adjustable baseplates for tubular steel scaffolds
- TIS 899-2532 (1989)
Flat plate solar collectors
- TIS 900-2532 (1989)
Activated carbon
- TIS 901-2533 (1990)
Asphaltic sheet for autobody's lining
- TIS 902-2532 (1989)
Fixed general purpose luminaires
- TIS 903-2532 (1989)
Recessed luminaires
- TIS 904-2532 (1989)
Luminaires for road and street lighting
- TIS 905-2532 (1989)
Portable general purpose luminaires
- TIS 906-2532 (1989)
Floodlights
- TIS 907-2532 (1989)
Handlamps
- TIS 908-2532 (1989)
Automotive wheels: Aluminium alloy
- TIS 909-2532 (1989)
Current-operated earth-leakage circuit breakers
- TIS 910-2532 (1989)
Polybutylene (PB) pressure pipe and tubing for drinking water services
- TIS 911 Part 1-2532 (1989)
Graphical symbols for circuit diagrams Part 1 Symbol elements, qualifying symbols and other symbols having general application
- TIS 911 Part 2-2534 (1991)
Graphical symbols for circuit diagrams Part 2 Conductors and connection devices
- TIS 911 Part 3-2534 (1991)
Graphical symbols for circuit diagrams Part 3 Passive components
- TIS 912-2532 (1989)
Edible kapok seed oil
- TIS 913-2532 (1989)
Hard gelatin capsules
- TIS 914-2539 (1996)
Kunchiang sausage
- TIS 915-2535 (1992)
Liquefied petroleum gas cylinder valves
- TIS 916-2532 (1989)
Castors for furniture: rubber wheel
- TIS 917-2532 (1989)
Concrete joint sealer, cold application type
- TIS 918-2535 (1992)
Grey iron pipe fittings for water pressure lines
- TIS 919-2532 (1989)
Dried/dehydrated fruit
- TIS 920-2533 (1990)
Canned bamboo shoot
- TIS 921-2533 (1990)
Table-tennis tables
- TIS 922-2533 (1990)
Tapioca pellet die
- TIS 923-2533 (1990)
Pressure sensitive adhesive paper tape
- TIS 924-2533 (1990)
Pressure sensitive adhesive plastic tape oriented polypropylene
- TIS 925-2533 (1990)
Slip sheets
- TIS 926-2533 (1990)
Welded deformed steel wire fabric for concrete reinforcement
- TIS 927-2533 (1990)
Barite for petroleum-well drilling
- TIS 928-2533 (1990)
Code for hygienic practice for frozen foods
- TIS 929-2533 (1990)
Rules for rounding off numerical values
- TIS 930-2533 (1990)
Office furniture: chairs
- TIS 931-2533 (1990)
Office furniture: desks
- TIS 932-2533 (1990)
Food flavour enhancer and seasoning
- TIS 933-2533 (1990)
Glacial acetic acid
- TIS 934-2533 (1990)
A.C. electric fans: safety requirements
- TIS 935-2533 (1990)
Frozen minced fish (surimi)
- TIS 936-2533 (1990)
Cube sugar
- TIS 937-2533 (1990)
Crown closures
- TIS 938-2533 (1990)
Roll-on pilferproof closures
- TIS 939-2533 (1990)
Barium sulphate for pharmaceutical use
- TIS 940-2538 (1995)
Ball for soccer
- TIS 941-2538 (1995)
Ball for basketball
- TIS 942-2538 (1995)
Ball for volley-ball
- TIS 943-2533 (1990)
Cold-drawn deformed steel wire for concrete reinforcement
- TIS 944-2533 (1990)
Stabilizer bars for automobiles
- TIS 945-2533 (1990)
Liquefied petroleum gas storage tanks
- TIS 946-2533 (1990)
Cotton embroidery and crocheting threads
- TIS 947-2533 (1990)
Automotive rubber mats
- TIS 948-2533 (1990)
Mung bean starch
- TIS 949-2536 (1993)
Oriented polypropylene films
- TIS 950-2533 (1990)
Solid alcohol fuel
- TIS 951-2533 (1990)
Rubber bridge bearings
- TIS 952-2533 (1990)
Duplicating ink
- TIS 953-2533 (1990)
Metal curtain rails
- TIS 954-2537 (1994)
Rearview mirror
- TIS 955-2533 (1990)
Rubber insulated copper cables: braided cords
- TIS 956-2533 (1990)
Fluorescent lamps: safety requirements
- TIS 957-2533 (1990)
Zinc ingots
- TIS 958-2533 (1990)
Lead ingots
- TIS 959-2533 (1990)
Rice noodle
- TIS 960-2533 (1990)
Kuai Chap (rolled rice chip)
- TIS 961-2533 (1990)
Designation of bedding
- TIS 962-2533 (1990)
Bed sheets and pillowcases
- TIS 963-2533 (1990)
Tongue and groove wood flooring strips: nonteak
- TIS 964-2533 (1990)
Hot coiled helical springs
- TIS 965-2537 (1994)
Glasses for use in building: tempered glass
- TIS 966-2533 (1990)
Fibreboards: medium density fibreboards
- TIS 967-2533 (1990)
Dehydrated garlic powder
- TIS 968-2533 (1990)
Acrylic knitting yarn
- TIS 969-2533 (1990)
Rubber nipples for babies' bottles
- TIS 970-2533 (1990)
Paper fastening device for files
- TIS 971-2533 (1990)
Prestressed concrete fence posts
- TIS 972-2533 (1990)
Dried cephalopods (squid, cuttle fish and octopus)
- TIS 973-2533 (1990)
Code of hygienic practice for frozen poultry
- TIS 974-2533 (1990)
Aerosol cans
- TIS 975-2538 (1995)
Hydraulic cylinders for general industries
- TIS 976-2533 (1990)
Gear oils
- TIS 977-2533 (1990)
Industrial hydraulic oils
- TIS 978-2533 (1990)
Engine cooling fan for automobile
- TIS 979-2533 (1990)
Unreinforced PVC hose for general purposes
- TIS 980-2533 (1990)
Natural rubber latex concentrate
- TIS 981-2533 (1990)
Cosmetics: compact face powders
- TIS 982-2533 (1990)
High-density polyethylene pipes for drinking water services
- TIS 983-2533 (1990)
Dimension of three-point linkage of agricultural wheeled tractors
- TIS 984-2533 (1990)
Ampicillin trihydrate
- TIS 985-2533 (1990)
Chemical admixtures for producing flowing concrete
- TIS 986-2533 (1990)
Correction fluid for use on stencil paper
- TIS 987-2533 (1990)
Cold coiled helical compression springs
- TIS 988-2533 (1990)
Recommendation for Thai combined character codes and symbols for line graphics for dot-matrix printers
- TIS 989-2533 (1990)
Stainless steel water tanks
- TIS 990-2533 (1990)
Gasohol
- TIS 991-2533 (1990)
Teleprinter paper
- TIS 992-2533 (1990)
Hinges for doors: spring hinges
- TIS 993-2533 (1990)
Rice paper
- TIS 994-2533 (1990)
Wood flooring strips with finger jointing: nonteak
- TIS 995-2533 (1990)
Braking of automotive vehicles and their trailers - Vocabulary
- TIS 996-2533 (1990)
Polypropylene ropes
- TIS 997-2533 (1990)
Plastics containers for vinegar
- TIS 998-2533 (1990)
Plastics containers for drinking water
- TIS 999-2533 (1990)
Unplasticized polyvinyl chloride pipes for industrial use
- TIS 1000-2533 (1990)
Agricultural discs
- TIS 1001-2533 (1990)
Liquefied petroleum gas vaporizer regulator for internal combustion engines
- TIS 1002-2533 (1990)
Plastics canteen
- TIS 1003-2533 (1990)
Dried shrimps
- TIS 1004-2533 (1990)
Packaged soft soybean curd
- TIS 1005-2533 (1990)
Semigloss enamel
- TIS 1006-2535 (1992)
Austenitic stainless steel pipes
- TIS 1007-2533 (1990)
Carbon disulphide for industrial use
- TIS 1008-2533 (1990)
Precooked macaroni
- TIS 1009-2533 (1990)
Beef ball, pork ball and chicken ball
- TIS 1010-2533 (1990)
Ethyl acetate
- TIS 1011-2533 (1990)
Tapioca pearl
- TIS 1012-2533 (1990)
Reinforced concrete water pipe
- TIS 1013-2533 (1990)
PVC door
- TIS 1014-2533 (1990)
Fittings for water-closet flushing cisterns
- TIS 1015 Part 1-2533 (1990)
Standard test methods for furniture Part 1 Stability of tables
- TIS 1015 Part 2-2533 (1990)
Standard test methods for furniture Part 2 Strength and durability of tables
- TIS 1015 Part 3-2534 (1991)
Standard test methods for furniture Part 3 Stability of chairs
- TIS 1015 Part 4-2535 (1992)
Standard test methods for furniture Part 4 Strength and durability of chairs
- TIS 1015 Part 5-2535 (1992)
Standard test methods for furniture Part 5 Stability of cabinets and shelves
- TIS 1015 Part 6-2535 (1992)
Standard test methods for furniture Part 6 Strength and durability of cabinets and shelves
- TIS 1016-2533 (1990)
n-butyl acetate
- TIS 1017-2533 (1990)
Catfood
- TIS 1018-2533 (1990)
Soymilk or soya bean milk
- TIS 1019-2533 (1990)
Coil spring for automobile suspensions
- TIS 1020-2533 (1990)
Office furniture: adjustable chairs
- TIS 1021-2534 (1991)
Threaded end connection turbine type water meter
- TIS 1022-2534 (1991)
Steel and aluminium alloy venetian blinds
- TIS 1023-2534 (1991)
Printing and writing paper correction fluid
- TIS 1024-2534 (1991)
Argon
- TIS 1025-2539 (1996)
Babies' dummies
- TIS 1026-2534 (1991)
Epoxy-resin-base bonding systems for concrete
- TIS 1027-2534 (1991)
Plastic bags for food
- TIS 1028-2534 (1991)
Mixed flour for deep-fry
- TIS 1029-2534 (1991)
Amyl acetate
- TIS 1030-2537 (1994)
Alternating current watthour meters: safety requirements
- TIS 1031-2534 (1991)
Plastics buttons
- TIS 1032-2534 (1991)
Solvent-welding cements for use with unplasticized PVC pipes and fittings
- TIS 1033-2534 (1991)
Aerosol lacquer
- TIS 1034-2534 (1991)
PVC sandals
- TIS 1035-2534 (1991)
Metal polish, liquid
- TIS 1036-2534 (1991)
Metal polish, pasted
- TIS 1037-2534 (1991)
Cold coiled helical tension springs
- TIS 1038-2535 (1992)
Coated steel sheet roofing tiles
- TIS 1039-2534 (1991)
Electric rice-cookers
- TIS 1040-2534 (1991)
Two-stroke gasoline engine lubricating oil
- TIS 1041-2534 (1991)
Joint filler for concrete (non-extruding and resilient type): asphalt
- TIS 1042-2534 (1991)
Backed flexible PVC flooring
- TIS 1043-2534 (1991)
PVC windows
- TIS 1044-2534 (1991)
Soybean threshers
- TIS 1045-2535 (1992)
Papers for continuous forms
- TIS 1046-2534 (1991)
Code of hygienic practice for frozen fishery products
- TIS 1047-2534 (1991)
Ferrosilicomanganese
- TIS 1048-2539 (1996)
Epoxy coating for steel potable water pipelines
- TIS 1049-2534 (1991)
School shoes
- TIS 1050-2534 (1991)
Naso-gastric tubes for medical use
- TIS 1051-2534 (1991)
Office furniture: cabinets and shelves
- TIS 1052-2534 (1991)
Roof drains
- TIS 1053-2534 (1991)
Floor drains
- TIS 1054-2534 (1991)
Xerographic papers
- TIS 1055-2534 (1991)
Rubber hoses for liquefied petroleum gas in liquid phase
- TIS 1056-2540 (1997)
Single-use rubber examination gloves
- TIS 1057-2534 (1991)
Ready-mixed gypsum plaster
- TIS 1058-2534 (1991)
White clay for paint industry
- TIS 1059-2534 (1991)
White clay for rubber industry
- TIS 1060-2534 (1991)
White clay for pesticide industry
- TIS 1061-2534 (1991)
Precooked or instant bean vermicelli
- TIS 1062-2535 (1992)
Rubber welding hoses
- TIS 1063-2534 (1991)
White clay for fertilizer industry
- TIS 1064-2534 (1991)
Paper coating kaolin
- TIS 1065-2534 (1991)
Drilling-mud bentonite
- TIS 1066-2534 (1991)
Alkyd resin varnish
- TIS 1067-2534 (1991)
Ferromanganese
- TIS 1068-2534 (1991)
Ferrosilicon
- TIS 1069-2535 (1992)
Colourants for plastics materials for food contact application
- TIS 1070-2535 (1992)
Silicon dioxide for rubber industry
- TIS 1071-2535 (1992)
Silicon dioxide for pesticide industry
- TIS 1072-2535 (1992)
Silicon dioxide for paint industry
- TIS 1073-2535 (1992)
Modified starch for food industry
- TIS 1074-2535 (1992)
6-Bit teletype codes
- TIS 1075-2535 (1992)
Conversion between computer codes and 6-Bit teletype codes
- TIS 1076-2535 (1992)
Linch pins for agriculture wheeled tractors
- TIS 1077-2535 (1992)
Line-post type porcelain insulators
- TIS 1078-2535 (1992)
Fabric typewriter ribbons
- TIS 1079-2535 (1992)
Concrete joint filler, sponge rubber and cork
- TIS 1080-2535 (1992)
Shrimp paste
- TIS 1081-2535 (1992)
Copper wire enamelling varnishes
- TIS 1082-2535 (1992)
Manual office typewriters
- TIS 1083-2535 (1992)
Measurement of coating thickness by microscopical method
- TIS 1084-2535 (1992)
Toluene for industrial use
- TIS 1085-2538 (1995)
Gasoline engined vehicles: safety requirements; emission from engine
- TIS 1086-2535 (1992)
Rubber hoses for petroleum products : fuel dispensers
- TIS 1087-2535 (1992)
Hydrogenated castor oil
- TIS 1088-2535 (1992)
12-Hydroxy stearic acid
- TIS 1089-2535 (1992)
Flavoured crispy peas and beans
- TIS 1090-2535 (1992)
Foundry sand mould bentonite
- TIS 1091-2535 (1992)
Raincoats
- TIS 1092-2535 (1992)
Etching primer
- TIS 1093-2535 (1992)
Flush valves for water-closets
- TIS 1094-2535 (1992)
Flush valves for urinals
- TIS 1095-2535 (1992)
Medical gas cylinder valve connections
- TIS 1096-2535 (1992)
Sodium hexametaphosphate for industrial use
- TIS 1097-2535 (1992)
Asbestos-cement roof tile acrylic paints
- TIS 1098-2535 (1992)
Powder coatings for steel work
- TIS 1099-2535 (1992)
Province identification codes for data interchange
- TIS 1100-2535 (1992)
Radio-frequency coaxial cables
- TIS 1101-2535 (1992)
Door closers for double swing doors
- TIS 1102-2538 (1995)
Self-contained emergency lighting luminaires
- TIS 1103-2535 (1992)
Potassium chlorate
- TIS 1104-2535 (1992)
Powder coatings for aluminium alloys
- TIS 1105-2535 (1992)
Motorcycles: safety requirements; emission from engine, level 1
- TIS 1106-2535 (1992)
Mosaic parquet panels: nonteak
- TIS 1107-2535 (1992)
Plastics laminated plywood for concrete formwork
- TIS 1108-2535 (1992)
Polyester resin coated boards
- TIS 1109-2535 (1992)
Aerials for the reception of sound and television broadcasting in the frequency range 30 MHz to 1 GHz
- TIS 1110-2535 (1992)
Test methods for power tillers
Withdrawn, 13 June B.E. 2539 (1997) and replaced by TIS 1350-2539 (1997)
- TIS 1111-2535 (1992)
Representation of dates and times
- TIS 1112-2535 (1992)
Zinc sulphate for industrial use
- TIS 1113-2535 (1992)
Cotton bud
- TIS 1114-2535 (1992)
Feed additive L-lysine monohydrochloride
- TIS 1115-2535 (1992)
Paper folders and files
- TIS 1116-2535 (1992)
U-shaped plastics shopping bags
- TIS 1117-2535 (1992)
Table tennis balls
- TIS 1118-2535 (1992)
Curtain fabrics
- TIS 1119-2535 (1992)
Teleprinter paper tapes
- TIS 1120-2535 (1992)
Gasoline engined vehicles: safety requirements; emission from engine, level 2
Withdrawn, 28 March B.E. 2539 (1997)
- TIS 1121-2535 (1992)
Ethylene vinyl acetate base hot-melt adhesive
- TIS 1122-2535 (1992)
Dental operator's stool
- TIS 1123-2539 (1996)
Plaster primer
- TIS 1124-2535 (1992)
Zinc chloride
- TIS 1125-2535 (1992)
Vertical/Inclined pumps
- TIS 1126-2535 (1992)
Moldboard ploughs for power tiller
- TIS 1127-2535 (1992)
Tractor-operated disc ploughs
- TIS 1128-2535 (1992)
Roofing steel sheets
- TIS 1129-2535 (1992)
Elevated flooring
- TIS 1130-2535 (1992)
Castors for furniture: nylon wheel
- TIS 1131-2535 (1992)
Unplasticized polyvinyl chloride fittings for use with pressure pipes
- TIS 1132-2536 (1993)
Containers for high flash point petroleum products
- TIS 1133-2536 (1993)
Propan-2-ol for industrial use
- TIS 1134-2536 (1993)
Talcum for paint industry
- TIS 1135-2536 (1993)
Rubber waterstops
- TIS 1136-2536 (1993)
Cling film
- TIS 1137-2536 (1993)
Cocoa powder for industrial use
- TIS 1138-2536 (1993)
Solid wood parquet strips: nonteak
- TIS 1139-2536 (1993)
Seamless copper pipes and tubes
- TIS 1140-2536 (1993)
Light duty diesel engined vehicles: safety requirements; emission from engine, level 1
- TIS 1141-2536 (1993)
Beverage paper cups
- TIS 1142-2536 (1993)
Sodium hydrosulphite for industrial use
- TIS 1143-2536 (1993)
Sodium chlorate
- TIS 1144-2536 (1993)
Rubber hoses for saturated steam
- TIS 1145-2536 (1993)
Polypropylene pipes for industrial uses
- TIS 1146-2536 (1993)
Rollers for aluminium sliding doors and windows
- TIS 1147-2536 (1993)
Coloured pencils
- TIS 1148-2536 (1993)
Leads for coloured pencils
- TIS 1149-2540 (1997)
Wax crayons
- TIS 1150-2536 (1993)
Glass-marking or dermatograph pencils
- TIS 1151-2536 (1993)
Abrasive papers
- TIS 1152-2536 (1993)
Nam phrik phao (Thai fried chilli paste)
- TIS 1153-2536 (1993)
Steel frame wall-panels
- TIS 1154-2536 (1993)
Children's cots
- TIS 1155-2536 (1993)
Air-cooled split type room air conditioners
- TIS 1156-2536 (1993)
Talcum for ceramic industry
- TIS 1157-2536 (1993)
Paper filler talcum
- TIS 1158-2536 (1993)
Talcum for general industry
- TIS 1159-2536 (1993)
Sulphamethoxazole
- TIS 1160-2536 (1993)
Trimethoprim
- TIS 1161-2536 (1993)
Erythromycin
- TIS 1162-2536 (1993)
Automobile door hinges
- TIS 1163-2536 (1993)
Thermosetting laminated sheets
- TIS 1164-2536 (1993)
Precast reinforced concrete box sections for drainage under sidewalk
- TIS 1165-2536 (1993)
Precast reinforced concrete box sections for drainage with less than 0.6 m of cover subjected to highway loading
- TIS 1166-2536 (1993)
Precast reinforced concrete box sections for drainage with 0.6-3.0 m of cover subjected to highway loading
- TIS 1167-2536 (1993)
Acetylsalicylic acid for pharmaceutical industry
- TIS 1168-2536 (1993)
Bread crumb
- TIS 1169-2536 (1993)
Coffee beverages
- TIS 1170-2536 (1993)
Fructose syrup
- TIS 1171-2536 (1993)
Dextrin for food industry
- TIS 1172-2536 (1993)
Groundnut shellers
- TIS 1173-2536 (1993)
Sorghum thresers
- TIS 1174-2536 (1993)
Piston for internal combustion engines
- TIS 1175-2536 (1993)
Bar code symbol for commodity goods
- TIS 1176-2536 (1993)
Nam phrik (chilli paste)
- TIS 1177-2536 (1993)
Primer-conditioner for chalking painted masonry surfaces
- TIS 1178-2536 (1993)
Urea-formaldehyde moulding compounds
- TIS 1179 Part 1-2536 (1993)
Code of practice for manufacture of prestressed concrete Part 1 General
- TIS 1179 Part 2-2536 (1993)
Code of practice for manufacture of prestressed concrete Part 2 Materials
- TIS 1180-2538 (1995)
Heavy duty diesel engined vehicles: Safety requirements; emission from engine, level 1
- TIS 1181-2536 (1993)
Plastic babies' bottles
- TIS 1182 Part 1-2536 (1993)
Test methods for petroleum products Part 1 Determination of lead content in gasoline-iodine monochloride method
- TIS 1182 Part 2-2537 (1994)
Test methods for petroleum and petroleum products Part 2 Flash and fire points by Cleveland open cup
- TIS 1182 Part 3-2537 (1994)
Test methods for petroleum and petroleum products Part 3 Determination of density, relative density or API gravity-hydrometer method
- TIS 1182 Part 4-2538 (1995)
Test methods for petroleum and petroleum products Part 4 Rapid field test for trace lead in unleaded gasoline
- TIS 1182 Part 5-2538 (1995)
Test methods for petroleum and petroleum products Part 5 Vapour pressure-Reid method
- TIS 1182 Part 6-2538 (1995)
Test methods for petroleum and petroleum products Part 6 Determination of water
- TIS 1182 Part 7-2539 (1996)
Test methods for petroleum and petroleum products Part 7 Saybolt viscosity
- TIS 1182 Part8-2539 (1996)
Test methods for petroleum and petroleum products Part 8 Determination of benzene and toluene in motor and aviation gasoline by gas chromatography
- TIS 1182 Part 9-2539 (1996)
Test methods for petroleum and petroleum products Part 9 Determination of phosphorus in gasoline
- TIS 1182 Part 10-2539 (1996)
Test methods for petroleum and petroleum products Part 10 Trace determination of lead in gasoline
- TIS 1182 Part 11-2541 (1998)
Test methods for petroleum and petroleum products Part 11…………
- TIS 1183-2536 (1993)
Office furniture: steel desks
- TIS 1184-2536 (1993)
Textile-reinforced hydraulic rubber hoses
- TIS 1185-2536 (1993)
Motorcycles: safety requirements; emission from engines, level 2
- TIS 1186-2536 (1993)
Cutting edges for tractors with dozer, graders and tractor scrapers
- TIS 1187-2536 (1993)
Shower baths
- TIS 1188-2536 (1993)
Faucets for bathtubs
- TIS 1189-2536 (1993)
Faucets for shower baths
- TIS 1190-2536 (1993)
Artificial marble sanitary appliances: wash basins
- TIS 1191-2536 (1993)
Ceramic baluster
- TIS 1192-2536 (1993)
Aluminium alloy casting
- TIS 1193-2536 (1993)
Precast reinforced concrete drainage manholes
- TIS 1194-2536 (1993)
Metal panels for concrete formwork
- TIS 1195-2536 (1993)
Mains operated electronic and related apparatus for household and similar general use: safety requirements
- TIS 1196-2536 (1993)
Dozers for agricultural wheeled tractors
- TIS 1197-2536 (1993)
Chilled pork and frozen pork
- TIS 1198-2536 (1993)
Prawn feed
- TIS 1199-2536 (1993)
Salted fish: Pla salit (Sepat-Siam)
- TIS 1200-2536 (1993)
Stainless steel bone screws with hexagonal drive connection, spherical under-surface of head, asymmetrical thread
- TIS 1201-2536 (1993)
Test method for penetration of bituminous materials
- TIS 1202-2536 (1993)
Test method for ductility of bituminous materials
- TIS 1203-2536 (1993)
Test method for solubility of bituminous materials in trichloroethylene
- TIS 1204-2536 (1993)
Salted fish: Spanish mackerel
- TIS 1205-2536 (1993)
Alkalized eggs
- TIS 1206-2536 (1993)
Erythromycin stearate
- TIS 1207-2536 (1993)
Erythromycin estolate
- TIS 1208-2536 (1993)
Domestic furniture: tables for living rooms
- TIS 1209-2536 (1993)
Domestic furniture: chairs for living rooms
- TIS 1210-2536 (1993)
Rubber hoses for petroleum products: oil suction and discharge
- TIS 1211-2537 (1994)
Acetaminophen for pharmaceutical use
- TIS 1212-2537 (1994)
Turpentine for pharmaceutical industry
- TIS 1213-2537 (1994)
Erasers
- TIS 1214-2537 (1994)
Cinnamon
- TIS 1215-2537 (1994)
Gems and gemstones-vocabulary
- TIS 1216-2537 (1994)
test method for softening point of bituminous materials (ring-and-ball apparatus)
- TIS 1217-2537 (1994)
Code of practice for painting and application of silicone-based water repellents to stucco, masonry and brick surfaces
- TIS 1218-2537 (1994)
Shoe polish
- TIS 1219-2537 (1994)
Naem (Fermented ground pork)
- TIS 1220-2537 (1994)
Fire-resistant steel doorsets: side hung
- TIS 1221-2537 (1994)
Solid wood parquet strips: teak
- TIS 1222-2539 (1996)
Glass for use in buildings: laminated safety glass
- TIS 1223-2537 (1994)
Test method for effect of heat and air on properties of bituminous materials
- TIS 1224-2537 (1994)
Electric arc welding machines: safety requirements
- TIS 1225-2537 (1994)
Precast reinforced concrete drainage manhole pipes
- TIS 1226-2537 (1994)
Precast reinforced concrete covers and frames for manhole pipes
- TIS 1227-2539 (1996)
Hot rolled structural steel sections
- TIS 1228-2537 (1994)
Cold formed structural steel sections
- TIS 1229-2537 (1994)
Compressed hydrogen
- TIS 1230-2537 (1994)
Resinoid cut-off wheels
- TIS 1231-2537 (1994)
Glass for use in buildings: insulating glass
- TIS 1232-2537 (1994)
Glass fibre reinforced polyester bathtubs
- TIS 1233-2537 (1994)
Binders for paints and varnishes : Amino resin
- TIS 1234-2537 (1994)
Plugs, socket-outlets and couplers for industrial purpose
- TIS 1235-2537 (1994)
Commercial refrigerated cabinets
- TIS 1236-2537 (1994)
Seeders
- TIS 1237-2537 (1994)
Precast reinforced concrete covers and frames for manholes
- TIS 1238-2537 (1994)
PVC coated polyester canvas
- TIS 1239-2537 (1994)
PVC waterstops for sealing joints in concrete
- TIS 1240-2537 (1994)
Industrial wheels for non-powered equipment: Rubber tyre
- TIS 1241-2537 (1994)
Industrial castors for non-powered equipment: rubber tyre
- TIS 1242-2537 (1994)
Tin ingots
- TIS 1243-2537 (1994)
test method for viscosity of bituminous materials by vacuum capillary viscometer
- TIS 1244-2537 (1994)
Aerosol fluorescent lacquer
- TIS 1245-2537 (1994)
Melamine-formaldehyde moulding compounds
- TIS 1246-2537 (1994)
Metal containers for liquid coatings
- TIS 1247-2537 (1994)
Liquid paraffin for pharmaceutical, cosmetic and food industries
- TIS 1248-2537 (1994)
Upholstery fabrics
- TIS 1249-2537 (1994)
test method for kinematic viscosity of bituminous materials
- TIS 1250-2537 (1994)
Accelerator cables for automobiles
- TIS 1251-2537 (1994)
Pin-post type porcelain insulators
- TIS 1252-2537 (1994)
Small-sized reciprocating air compressors
- TIS 1253-2537 (1994)
Multi-purpose furniture: metal chairs
- TIS 1254-2537 (1994)
Zip plastics bags
- TIS 1255-2537 (1994)
Sampling of bituminous materials
- TIS 1256-2537 (1994)
Calcium monohydrogen phosphate for dentifrice
- TIS 1257-2537 (1994)
Feed additive calcium monohydrogen phosphate
- TIS 1258-2537 (1994)
Three-point hitch-mounted polydisc tillers
- TIS 1259-2537 (1994)
Talcum for cosmetic industry
- TIS 1260-2537 (1994)
Popcorn
- TIS 1261-2537 (1994)
Road vehicles - Vehicle Identification Number (VIN) - content and structure
- TIS 1262-2537 (1994)
Road vehicles - World Manufacturer Identifier (WMI) code
- TIS 1263-2537 (1994)
Road vehicles - Vehicle Identification Number (VIN) - location and attachment
- TIS 1264-2537 (1994)
Road vehicles - World parts manufacturer identifier (WPMI) code
- TIS 1265-2537 (1994)
Pressure caps for automobile radiators
- TIS 1266-2537 (1994)
Fermented pork sausage
- TIS 1267-2537 (1994)
Diesel oil for high-speed engines
- TIS 1268-2537 (1994)
Kerosene
- TIS 1269-2537 (1994)
Unleaded gasoline
- TIS 1270-2537 (1994)
Vocabulary used in petroleum industry
- TIS 1271-2538 (1995)
Threaded end connection piston type water meter
- TIS 1272-2538 (1995)
Electrodeposited metallic coatings: nickel plus chromium and copper plus nickel plus chromium
- TIS 1273-2538 (1995)
Hydraulic spray nozzle for crop protection
- TIS 1274-2538 (1995)
Tablecloth and napery
- TIS 1275-2538 (1995)
test method for distillation of cut-back asphalt
- TIS 1276-2538 (1995)
Artificial marble sanitary appliances: bathtubs
- TIS 1277-2538 (1995)
Faucets for sinks
- TIS 1278-2538 (1995)
Faucets for wash basins
- TIS 1279-2538 (1995)
Chromium coated steel sheet
- TIS 1280-2538 (1995)
Gasoline engined vehicles: safety requirements; emission from engine, level 3
- TIS 1281-2538 (1995)
Manganese sulphate monohydrate
- TIS 1282-2538 (1995)
Wastes for wash basins
- TIS 1283-2538 (1995)
Rotary slashers
- TIS 1284-2538 (1995)
Steel lockers
- TIS 1285-2538 (1995)
Light duty diesel engined vehicles: safety requirements; emission from engine, level 2
- TIS 1286-2538 (1995)
Steel balls
- TIS 1287-2538 (1995)
Water for analytical laboratory use
- TIS 1288-2538 (1995)
Metal frames and panel-frames for doors and windows: cold formed steel doorsets
- TIS 1289-2538 (1995)
Vinyl-tar tie coat
- TIS 1290-2538 (1995)
Heavy duty diesel engined vehicles: safety requirements; emission from engine, level 2
- TIS 1291-2538 (1995)
Uninterruptible power systems
- TIS 1292-2538 (1995)
Self-commutated inverters for uninterruptible power systems
- TIS 1293-2538 (1995)
Battery chargers
- TIS 1294-2538 (1995)
test method for flash point of cutback asphalt with tag open-cup
- TIS 1295-2538 (1995)
Heavy duty diesel engined vehicles: safety requirements; emission from engine, level 3
- TIS 1296-2538 (1995)
Two-hole paper punches
- TIS 1297-2538 (1995)
Floating fish feed
- TIS 1298-2538 (1995)
Plastics blood packs for human blood and blood components
- TIS 1299-2538 (1995)
Sodium citrate
- TIS 1300-2537 (1994)
General requirements for the competence of calibration and testing laboratories
- TIS 1301-2538 (1995)
Tongue and groove solid wood flooring strips: Teak
- TIS 1302-2538 (1995)
Solid wood flooring strips with tongue-and-groove sides and ends: teak
- TIS 1303-2538 (1995)
Welded structural steel sections
- TIS 1304-2538 (1995)
Fire-resistant timber doorsets: side hung
- TIS 1305-2538 (1995)
Motorcycles, engine capacity not exceeding 110 cubic centimeters: safety requirements; emission from engine, level 3
- TIS 1306-2538 (1995)
Polypropylene resin
- TIS 1307-2538 (1995)
Zinc rich paint, inorganic type
- TIS 1308-2538 (1995)
Public furniture: multiple chairs
- TIS 1309-2538 (1995)
Multi-purpose furniture: plastics chairs
- TIS 1310-2538 (1995)
Symbols for recycling plastics
- TIS 1311-2538 (1995)
Heat shrinkable film
- TIS 1312-2538 (1995)
Orthopaedic implants-General requirements for marking, packaging and labelling
- TIS 1313-2538 (1995)
Fuel oils
- TIS 1314-2538 (1995)
Plastics garbage bags
- TIS 1315-2538 (1995)
Agricultural vehicles: farm trucks
- TIS 1316-2538 (1995)
Metal shelving
- TIS 1317-2538 (1995)
Oyster sauce
- TIS 1318-2538 (1995)
Antiblush thinner
- TIS 1319-2538 (1995)
Test method for float test for bituminous materials
- TIS 1320-2538 (1995)
Zirconium silicate
- TIS 1321-2539 (1996)
Rubber and plastics hose-Determination of adhesion between components
- TIS 1322-2539 (1996)
Trailers for walk-behind tractors
- TIS 1323-2539 (1996)
Rotary cultivators
- TIS 1324-2539 (1996)
Non-destructive testing penetrant testing
- TIS 1325 Part 1-2539 (1996)
Acceptance code for machine tools Part 1 geometric accuracy of machines operating under no-load or finishing conditions
- TIS 1326-2539 (1996)
Domestic furniture: steel wardrobes
- TIS 1327-2539 (1996)
Crop protection equipment: slide-action (trombone) sprayers
- TIS 1328-2539 (1996)
Traps for wash basins and urinals
- TIS 1329-2539 (1996)
Unsaturated polyester resin for reinforced plastics
- TIS 1330-2539 (1996)
Nail polish or nail enamel
- TIS 1331-2539 (1996)
Calcium citrate
- TIS 1332-2539 (1996)
Rubber and plastics hoses and hose assemblies-hydrostatic testing
- TIS 1333-2539 (1996)
Reinforced PVC hoses for liquefied petroleum gases (vapour phase)
- TIS 1334-2539 (1996)
Fire-resistance test - Elements of building construction
- TIS 1335-2539 (1996)
Fire-resistance tests - Door and Shutter assemblies
- TIS 1336-2539 (1996)
Fire-resistance tests - Glazed elements
- TIS 1337-2539 (1996)
Fire-resistance tests - Ventilation ducts
- TIS 1338-2539 (1996)
Fire tests - Building materials - Non-combustibility test
- TIS 1339-2539 (1996)
Building materials - Determination of calorific potential
- TIS 1340-2539 (1996)
Fire tests - Reaction to fire - Ignitability of building products
- TIS 1341 Part 1-2539 (1996)
Fire tests - Evaluation of performance of smoke control door asemblies Part 1 ambient temperature test
- TIS 1342-2539 (1996)
Brown sugar
- TIS 1343-2539 (1996)
Interior clear coating moisture cured polyurethane
- TIS 1344-2541 (1998)
Tinted float glass
- TIS 1345-2539 (1996)
Tinted sheet glass
- TIS 1346-2539 (1996)
Mu Yor sausage
- TIS 1347-2539 (1996)
Formic acid
- TIS 1348-2539 (1996)
Polycarbonate
- TIS 1349-2539 (1996)
Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials
- TIS 1350-2539 (1996)
Walk-behind tractors
- TIS 1351-2539 (1996)
Crop prtection equipment : lever-operated knapsack sprayers
- TIS 1352-2539 (1996)
Binder clips : wire handles type
- TIS 1353 Part 2-2539 (1996)
Test methods for paper and paperboard Part 2 Determination of moisture content
- TIS 1353 Part 3-2540 (1997)
Test Methods for paper and paper board Part 3 Determination of tensile properties, constant rate of loading method
- TIS 1353 Part 4-2540 (1997)
Test Methods for paper and paper board Part 4 Determination of tensile properties, constant rate of elongation method
- TIS 1354-2539 (1996)
Sodium cyclamate for pharmaceutical use
- TIS 1355-2539 (1996)
Motorcycles: safety requirements; emission from engine, level 3: engine capacity not exceeding 125 cubic centimetres
- TIS 1356-2539 (1996)
Floor polish, paste
- TIS 1357-2539 (1996)
Floor polish, liquid in organic solvent
- TIS 1358-2539 (1996)
Urethral catheters withpot balloons
- TIS 1359-2539 (1996)
2-Butanone for industrial use
- TIS 1360-2539 (1996)
Motorcycles: safety requirements; emission from engine, level 3
- TIS 1361-2539 (1996)
Activated clay
- TIS 1362-2539 (1996)
Nail enamel remover
- TIS 1363-2539 (1996)
Magnesium chloride for industrial use
- TIS 1364-2539 (1996)
Magnesium chloride for chemical analysis
- TIS 1365-2539 (1996)
Gasoline engined vehicles: safety requirements; emission from engine, level 4
- TIS 1366-2539 (1996)
Spacers for reinforced concrete
- TIS 1367-2539 (1996)
Solid wood flooring strips with tongue-and-groove sides and ends: Nonteak
- TIS 1368-2539 (1996)
Air vent valves for water service
- TIS 1369-2539 (1996)
Steel tape measures : automatic winding type
- TIS 1370-2539 (1996)
Light duty diesel engined vehicles : safety requirements; emission from engine, level 3
- TIS 1371-2539 (1996)
Canned young palmyra kernel
- TIS 1372-2539 (1996)
Canned banana
- TIS 1373-2539 (1996)
Canned young palmyra kerneland jackruit
- TIS 1374-2539 (1996)
Canned jackruit
- TIS 1375 Part 1-2539 (1996)
Safety of household and similar electrical appliances Part 1 General requirements
- TIS 1376-2539 (1996)
Sandwitch spread
- TIS 1377-2539 (1996)
Self-closing faucets for wash basins
- TIS 1378-2539 (1996)
Cold-rolled stainless steel coils, strips and sheets
- TIS 1379-2539 (1996)
Plastics water tanks
- TIS 1380-2539 (1996)
Sampling of petroleum and petroleum products
- TIS 1381-2539 (1996)
Canned water chestnut
- TIS 1382-2539 (1996)
Dried bael
- TIS 1383-2539 (1996)
Solvent-dye type wood stain
- TIS 1384-2539 (1996)
Thermal insulation polyethylene
- TIS 1385-2539 (1996)
Paddy dryers
- TIS 1386-2539 (1996)
Instant bael
- TIS 1387 Part 1-2539 (1996)
Conical fittings with a 6% (luer) taper for syringes, needles and certain other medical equipment Part 1 General requirements
- TIS 1387 Part 2-2539 (1996)
Conical fittings with a 6% (luer) taper for syringes, needles and certain other medical equipment Part 2 Lock fittings
- TIS 1388-2539 (1996)
Copper and copper alloy sheets and strips
- TIS 1389-2539 (1996)
Tumbler dryers : safety requirments
- TIS 1390-2539 (1996)
Hot rolled steel sheet piles
- TIS 1391-2539 (1996)
Bacon and Canadian bacon
- TIS 1392-2539 (1996)
Hypodermic needles for single use - colour coding for identification
- TIS 1393-2539 (1996)
Depressed centre grinding wheels
- TIS 1394-2539 (1996)
Sterile suction catheters
- TIS 1395-2540 (1997)
Hollow glass blocks
- TIS 1396-2540 (1997)
Flexible air ducts
- TIS 1397-2540 (1997)
Disc ploughs for walk-behind tractors
- TIS 1398-2540 (1997)
Sterile hypodermic needles for single use
- TIS 1399-2540 (1997)
Metal Rules
- TIS 1400-2540 (1997)
Plastics Rulers
- TIS 1401-2540 (1997)
Plastics set squares
- TIS 1402-2540 (1997)
Mayonnaise and salad cream
- TIS 1403-2540 (1997)
Liquid soap
- TIS 1404-2540 (1997)
Flexible polyurethane foam mattresses
- TIS 1405-2540 (1997)
Heat resistant Aluminium paint
- TIS 1406-2540 (1997)
Flat enamel
- TIS 1407-2540 (1997)
Fibre-cement profile sheets
- TIS 1408-2540 (1997)
Roof ventilators
- TIS 1409-2540 (1997)
Multi-purpose furniture : stools
- TIS 1410-2540 (1997)
Unplasticized polyvinyl chloride pipe fittings for soil, waste and vent (SWV) applications
- TIS 1411-2540 (1997)
Plastics medicine measuring spoons
- TIS 1412-2540 (1997)
Coal dust for containers of batteries
- TIS 1413-2540 (1997)
Cast iron rubber-seated gate valves for water services
- TIS 1414-2540 (1997)
Metal fence panels
- TIS 1415-2540 (1997)
Zinc rich primer, organic type
- TIS 1416-2540 (1997)
Hard-material tool tips.
- TIS 1417-2540 (1997)
Marble slabs
- TIS 1418-2540 (1997)
Rice reapers
- TIS 1419-2540 (1997)
Water filter : Granular activated carbon and cation exchange resin type
- TIS 1420-2540 (1997)
Ceramie water filter candle
- TIS 1421-2540 (1997)
Water filter : Ceramic filter candle type
- TIS 1422-2540 (1997)
Zeolite for detergent industry
- TIS 1423-2540 (1997)
Abrasive Emery
- TIS 1424-2540 (1997)
Office furniture: Partitions
- TIS 1425-2540 (1997)
Latex foam rubber mattresses
- TIS 1426-2540 (1997)
Infusion sets
- TIS 1427-2540 (1997)
Fibre-cement flat sheets
- TIS 1428-2540 (1997)
Rice combine harvesters
- TIS 1429-2540 (1997)
Small four-wheeled tractors
- TIS 1430-2540 (1997)
Technical drawings-construction drawings-drawings for the assembly of prefabricated structure
- TIS 1431-2540 (1997)
Public information symbols
- TIS 1432 Part 1-2540 (1997)
Implants for surgery-Metallic materials Part 1 Wrought stainless steel
- TIS 1433-2540 (1997)
Sizes of textbooks
- TIS 1434-2540 (1997)
Single suction centrifugal pumps
- TIS 1435-2540 (1997)
Light duty diesel engined vehicles:safety reguirements; emission from engine, level 4
- TIS 1436-2540 (1997)
Low-voltage switchgear and controlgear assemblies
- TIS 1437-2540 (1997)
Chilled duck and frozen duck
- TIS 1438-2540 (1997)
Re-refined base oil
- TIS 1439-2540 (1997)
Austenitic stainless steel tubes for heat-exchangers
- TIS 1440-2540 (1997)
Gasoline engined vehicles: safety requirements; emission from engine, level 5
- TIS 1441-2540 (1997)
Radio disturbance and immunity measuring apparatus and methods Part 1 : Radio disturbance and immunity measuring apparatus
- TIS 1442-2540 (1997)
Electromagnetic disturbances : methods of measurement of the suppression characteristics of passive radio interference filters and suppression components
- TIS 1443-2540 (1997)
Electromagnetic disturbances : determination of limits for industrial, scientific and medical equipment
- TIS 1444-2540 (1997)
Electromagnetic compatibility (EMC) Part 2 : environment Section 1 : description of the environment-electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems
- TIS 1445-2540 (1997)
Electromagnetic compatibitity (EMC) Part 2 : environment Section 2 : compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
- TIS 1446-2540 (1997)
Electromagnetic compatibility (EMC) Part 2 : environment Section 5 : classification of eletromagnetic environments
- TIS 1447-2540 (1997)
Electromagnetic compatibility (EMC) Part 2 environment Section 6 : assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances
- TIS 1448-2540 (1997)
Electromagnetic compatibility (EMC) Part 3 limits Section 2 : limits for harmonic current emissions (equipment input current £ 16 A per phase)
- TIS 1449-2540 (1997)
Electromagnetic compatibility (EMC) Part 3 : limits Section 3 limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current £ 16 A
- TIS 1450-2540 (1997)
Electromagnetic compatibility (EMC) Part 3 : limits Section 5: limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current greater than 16 A
- TIS 1451-2540 (1997)
Electromagnetic compatibility (EMC) Part 4: testing and measurement techniques Section 1: overview of immunity tests
- TIS 1452-2540 (1997)
Electromagnetic compatibility (EMC) Part 4: testing and measurement techniques Section 2: electrostatic discharge immunity tests
- TIS 1453-2540 (1997)
Electromagnetic compatibility (EMC) Part 4: testing and measurement techniques Section 3: radiated, radio-frequency, electromagnetic field immunity tests
- TIS 1454-2540 (1997)
Electromagnetic compatibility (EMC) Part 4: testing and measurement techniques Section 4: electrical fast transient/burst immunity tests
- TIS 1455-2540 (1997)
Electromagnetic compatibility (EMC) Part 4: testing and measurement techniques Section 5: surge immunity tests
- TIS 1456-2540 (1997)
Electromagnetic compatibility (EMC) Part 4: testing and measurement techniques Section 7: general guide on harmonics and interharmonice measurement and instrumentation, for power supply systems and equipment connected thereto
- TIS 1457-2540 (1997)
Electromagnetic compatibility (EMC) Part 4: testing and measurement techniques Section 8: power frequency magnetic field immunity test
- TIS 1458-2540 (1997)
Electromagnetic compatibility (EMC) Part 4: testing and measurement techniques Section 9: pulse magnetic field immunity test
- TIS 1459-2540 (1997)
Electromagnetic compatibility (EMC) Part 4: testing and measurement techniques Section 10: damped oscillatory magnetic field immunity test
- TIS 1460-2540 (1997)
Electromagnetic compatibility (EMC) Part 4: testing and measurement techniques Section 11: voltage dips, short interruptions and voltage variations immunity tests
- TIS 1461-2540 (1997)
Electromagnetic compatibility (EMC) Part 4: testing and measurement techniques Section 12: oscillatory waves immunity test
- TIS 1462-2540 (1997)
Washing machine
- TIS 1463-2540 (1997)
Washing machine : safety requirements
- TIS 1464-2540 (1997)
Fuel filter for automotive compression ignition engines
- TIS 1465-2540 (1997)
The protection of the driver against the steering in the event of impact : safety requirements
- TIS 1466-2540 (1997)
Vehicles braking system safety requirements
- TIS 1467-2540 (1997)
Vehicles seat-belt anchorages : safety requirements
- TIS 1468-2540 (1997)
Interior fittings : safety requirements
- TIS 1469-2540 (1997)
External projections : safety requirments
- TIS 1470-2540 (1997)
The installation of lighting and light-signalling devices : safety requirements
- TIS 1471-2540 (1997)
Vehicles steering system safety requirements
- TIS 1472-2540 (1997)
Passenger cars : safety requirement
- TIS 1473-2540 (1997)
Technical drawings-installation : Graphical symbols for pumbing, heating, ventilation and ducting
- TIS 1474-2540 (1997)
Building and civil engineering drawings-installation : simplified representation of sanitary appliances
- TIS 1475-2540 (1997)
Technical drawings-installation : Graphical symbols for supply water and drainage system in the Ground
- TIS 1476-2540 (1997)
Technical drawings-construction drawings-general rules for execution of production drawings for prefabricated structural components
- TIS 1477-2540 (1997)
Technical drawings-construction drawings-general principles of presentation for general arrangement and assembly drawings
- TIS 1478-2540 (1997)
Technical drawings-construction drawings-representation of modolar sizes, lines and grids
- TIS 1479-2540 (1997)
Hot-rolled carbon steel coil, strip, plate and sheet for general structure
- TIS 1480-2540 (1997)
Sugar cane planters
- TIS 1481-2540 (1997)
Code of hygienic pratice for salted or dried fishery products
- TIS 1482-2540 (1997)
PVC floor tiles
- TIS 1483-2540 (1997)
Fibreglass pressure pipes for water services
- TIS 1484-2540 (1997)
Fibreglass pressure pipes for industrial and sewerage services
- TIS 1485-2540 (1997)
Fibreglass non-pressure pipes for industrial and sewerage services
- TIS 1486-2540 (1997)
Water supply hoses for sanitary wares : plastics hose
- TIS 1487-2540 (1997)
Waste fittings for bathtubs
- TIS 1488-2540 (1997)
Steel drums capacity not exceeding 100 litre
- TIS 1489-2540 (1997)
200-litre steel drums
- TIS 1490-2540 (1997)
PVC-U lining steel pipes for water services
- TIS 1497-2541 (1998)
Rinsing sprays
- TIS 1499-2541 (1998)
Hot-rolled carbon steel coil, strip, plate and sheet for welded structure
- TIS 1500-2540 (1997)
Metal gates
- TIS 1501-2541 (1998)
Hot-rolled carbon steel coil, strip, plate and sheet for machine structure use
- TIS 1505-2541 (1998)
Autoclaved aerated lightweight concrete elements
- TIS 2000-2540 (1997)
International standard industrial classification of all economic activities
- TIS 5022-2540 (1997)
General criteria for supplier's declaration of conformity
- TIS 5039-2540 (1997)
General requirements for the acceptance of inspection bodies
- TIS 5043 Part 1-2540 (1997)
Proficiency testing by interlaboratory comparisons Part 1 Development and operation of proficiency testing schemes
- TIS 5043 Part 2-2540 (1997)
Proficiency testing by interlaboratory comparisons Part 2 Selection and use of proficiency testing schemes by laboratory accreditation bodies
- TIS 5058-2540 (1997)
General requirements for calibration and testing laboratories accreditation
- TIS 5061-2540 (1997)
General requirements for accreditation of certification bodies
- TIS 5062-2540 (1997)
General requirements for bodies operating quality systems certification
- TIS 5065-2540 (1997)
General requirements for bodies operating product certification systems
- TIS 7000-2540 (1997)
Hazard analysis and critical control point (HACCP) system and guidelines for its application
- TIS 7001-2540 (1997)
Code of pratice for control of the use of veterinary drugs
- TIS 9000-2534 (1991)
Quality management and quality assurance: guidelines for selection and use
- TIS 9001-2539 (1996)
Quality systems: model for quality assurance in design/development, production, installation and servicing
- TIS 9002-2539 (1996)
Quality systems : model for quality assurance in production installation and servicing
- TIS 9003-2539 (1996)
Quality systems: model for quality assurance in final inspection and test
- TIS 9004-2534 (1991)
Quality management and quality system elements - guidelines
- TIS 10011 Part 1-2540 (1997)
Guidelines for auditing quality systems Part 1 Auditing
- TIS 10012 Part 2-2540 (1997)
Guidelines for auditing quality systems Part 2 Qualification criteria for quality systems auditors
- TIS 10013 Part 3-2540 (1997)
Guidelines for auditing quality systems Part 3 Management of audit programmes
- TIS 14001-2539 (1996)
Environmental management systems : Specification with guidance for use
- TIS 14004-2539 (1996)
Environmental management systems : General guidelines on principles, systems and supporting techniques
- TIS 14010-2539 (1996)
Guidelines for environmental auditing - General Principles
- TIS 14011-2539 (1996)
Guidelines for environmental auditing - Audit procedures - Auditing of environmental management systems
- TIS 14012-2539 (1996)
Guidelines for environmental auditing - Qualification criteria for environmental auditors
- TIS 18000-2540 (1997)
Occupational health and safety management systems: Specification
Last update : 8 April 1998